SC2602STRT
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 14-SOIC (0.154, 3.90mm Width) |
| Number of Pins | 14 |
| Operating Temperature | -40°C~85°C TA |
| Packaging | Tape & Reel (TR) |
| Published | 2013 |
| JESD-609 Code | e3 |
| Pbfree Code | yes |
| Part Status | Obsolete |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 14 |
| ECCN Code | EAR99 |
| Terminal Finish | Matte Tin (Sn) |
| Subcategory | Switching Regulator or Controllers |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Base Part Number | SC2602 |
| Function | Step-Down |
| Number of Outputs | 1 |
| Output Type | Transistor Driver |
| Analog IC - Other Type | SWITCHING CONTROLLER |
| Output Configuration | Positive |
| Output Current | 1kA |
| Voltage - Supply (Vcc/Vdd) | 4.2V~12.6V |
| Control Features | Enable, Phase Control, Power Good, Soft Start |
| Input Voltage (Min) | 4.2V |
| Topology | Buck |
| Control Mode | VOLTAGE-MODE |
| Frequency - Switching | 200kHz |
| Control Technique | PULSE WIDTH MODULATION |
| Synchronous Rectifier | Yes |
| Switcher Configuration | PUSH-PULL |
| Max Duty Cycle | 95 % |
| Clock Sync | No |
| Length | 8.65mm |
| Width | 3.9mm |
| RoHS Status | RoHS Compliant |
| Lead Free | Lead Free |
SC2602STRT Overview
With a 14-SOIC (0.154, 3.90mm Width) package, the switching controller is suitable for a wide range of applications. It is sufficient to generate 1 outputs with this dc motor controller. There is a Tape & Reel (TR) solid enclosure around the pmic. Transistor Driver dc switching's outputs (s) are supported. 4.2V~12.6V is the supply voltage and the operating voltage of the dc control. Suitable for working in an dc switcher that has a -40°C~85°C TA. Switching can be done at 200kHz with this switching controller. dc dc regulators can be carried out with Surface Mount. The dcdc regulator features Enable, Phase Control, Power Good, Soft Start for efficient switching control. Connected to a SWITCHING CONTROLLER analog IC, the switch converters are connected to a power supply. Thare switching converters has a terminal (s) at DUAL . There are many different types of terminations for 14. The control methods that these dc dc converter ics use include PULSE WIDTH MODULATION. Searching "SC2602" will return other relevant dc to dc converter ics. The switching converter has a total of 14 pins. There is a particular type of Switching Regulator or Controllers in switching converter. It is recommended that the input voltage of the dc dc voltage regulator be 4.2V. In most cases, the dc dc regulator's output current is 1kA. This information should be noted when you begin working with the component. Power-up and power-down reliability is ensured voltage regulator dc to dc by setting the maximum duty cycle to 95 %. Because of DC switcher's Surface Mount, it is suitable for most prototype designs and applications.
SC2602STRT Features
Transistor Driver Outputs
Switching Frequency: 200kHz
Enable, Phase Control, Power Good, Soft Start
PULSE WIDTH MODULATION
Max Duty Cycle: 95 %
SC2602STRT Applications
There are a lot of Semtech Corporation SC2602STRT DC to DC converter applications.
- Experimental setup
- Electric heating, lighting
- Fire elevators
- seismic instrument power circuits
- Gear/thread machining machines
- Thermal power
- Wind power
- SMT equipment
- Network technology
- Bending machines
