SC2612ESTRT
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 8-SOIC (0.154, 3.90mm Width) |
| Number of Pins | 8 |
| Operating Temperature | 0°C~70°C TA |
| Packaging | Tape & Reel (TR) |
| Published | 2013 |
| JESD-609 Code | e3 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 8 |
| ECCN Code | EAR99 |
| Terminal Finish | MATTE TIN |
| Subcategory | Switching Regulator or Controllers |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Function | Step-Down |
| Number of Outputs | 1 |
| Output Voltage | 11.25V |
| Output Type | Transistor Driver |
| Max Output Current | 10A |
| Operating Supply Voltage | 15V |
| Input Voltage-Nom | 5V |
| Analog IC - Other Type | SWITCHING CONTROLLER |
| Output Configuration | Positive |
| Voltage - Supply (Vcc/Vdd) | 4.5V~15V |
| Control Features | Enable, Soft Start |
| Topology | Buck |
| Min Input Voltage | 4.5V |
| Control Mode | VOLTAGE-MODE |
| Frequency - Switching | 500kHz |
| Max Input Voltage | 15V |
| Control Technique | PULSE WIDTH MODULATION |
| Synchronous Rectifier | Yes |
| Switcher Configuration | PUSH-PULL |
| Max Duty Cycle | 80 % |
| Clock Sync | No |
| Length | 4.9mm |
| Width | 3.9mm |
| RoHS Status | RoHS Compliant |
| Lead Free | Lead Free |
SC2612ESTRT Overview
Capsuled in the 8-SOIC (0.154, 3.90mm Width) package, the switching controller can be used for a wide range of applications. This dc motor controller can be used to generate outputs with 1 numbers. PMIC packaging is solid with a Tape & Reel (TR) enclosure. Transistor Driver dc switching's outputs (s) can be handled by it. A 4.5V~15V voltage is supplied to the dc control and used for operating it. Worked in an dc switcher with a 0°C~70°C TA rating. Using this switching controller, it is possible to switch at 500kHz. It is suitable for general dc dc regulator when it is set to Surface Mount. Switching control is made easier with the dcdc regulator's Enable, Soft Start. Switch converters are connected to ICs with SWITCHING CONTROLLER analog outputs. There are a DUAL terminal on the switching converters. Different dc switching's functions can be applied to 8 terminations. The control methods that these dc dc converter ics use include PULSE WIDTH MODULATION. 5V nominal DC switcher's voltage input. Pins number 8 of switching converter in total. Switching converter type is specifically Switching Regulator or Controllers. DC regulator outputs 11.25V voltage according to the test statistics. To ensure the reliability under power-up and power-down, the maximum duty cycle of the voltage regulator dc to dc is set as 80 %. Having a Surface Mount makes DC switcher suitable for most application and prototype designs. To operate the voltage regulator dc to dc safely and reliably, users should apply 15V. Users must limit the voltage accordingly because the dc switcher's maximum input voltage is 15V. A voltage of 4.5V must be present in the supply. An output current greater than 10A cannot be provided by the dc switcher.
SC2612ESTRT Features
Transistor Driver Outputs
Switching Frequency: 500kHz
Enable, Soft Start
PULSE WIDTH MODULATION
Max Duty Cycle: 80 %
SC2612ESTRT Applications
There are a lot of Semtech Corporation SC2612ESTRT DC to DC converter applications.
- Power supplies of electronic gadgets
- Fire elevators
- Scientific testing
- Gear/thread machining machines
- Elevator lighting
- Overvoltage protection circuits in TV sets
- Automation technology
- Scientific research
- Mobile phones
- Hydraulic presses
