SC2672STRT
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 16-SOIC (0.154, 3.90mm Width) |
| Number of Pins | 16 |
| Operating Temperature | -40°C~85°C TA |
| Packaging | Tape & Reel (TR) |
| Published | 2013 |
| JESD-609 Code | e3 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 16 |
| ECCN Code | EAR99 |
| Terminal Finish | Matte Tin (Sn) |
| Subcategory | Switching Regulator or Controllers |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Function | Step-Down |
| Number of Outputs | 2 |
| Output Voltage | 2.75V |
| Output Type | Transistor Driver |
| Input Voltage-Nom | 5V |
| Analog IC - Other Type | DUAL SWITCHING CONTROLLER |
| Output Configuration | Positive |
| Output Current | 1.7kA |
| Voltage - Supply (Vcc/Vdd) | 3V~15V |
| Max Supply Current | 10mA |
| Control Features | Enable, Power Good, Soft Start |
| Input Voltage (Min) | 3V |
| Topology | Buck |
| Control Mode | VOLTAGE-MODE |
| Frequency - Switching | 300kHz |
| Input Voltage (Max) | 15V |
| Control Technique | PULSE WIDTH MODULATION |
| Synchronous Rectifier | Yes |
| Switcher Configuration | PUSH-PULL |
| Max Duty Cycle | 95 % |
| Clock Sync | No |
| Height Seated (Max) | 1.75mm |
| Length | 9.9mm |
| Width | 3.9mm |
| RoHS Status | RoHS Compliant |
| Lead Free | Lead Free |
SC2672STRT Overview
It comes in the 16-SOIC (0.154, 3.90mm Width) package, which makes switching controller suitable for most applications. 2 outputs are supported by the dc motor controller. Packaged in solid enclosures, this pmic has a Tape & Reel (TR) rating. With this function, you can deal with Transistor Driver dc switching's outputs (s). This dc control operates at 3V~15V and has a 3V~15V supply voltage. Work well in dc switchers with a -40°C~85°C TA. It can switch at 300kHz. The Surface Mount allows it to be used for dc dc regulator in general. To ensure efficient switching, this dcdc regulator features a Enable, Power Good, Soft Start. A DUAL SWITCHING CONTROLLER analog IC is connected to the switch converters. Thare switching converters has a terminal (s) at DUAL . 16 terminations with various dc switching's functions. To name a few of the control techniques these dc dc converter ics adapt, it includes PULSE WIDTH MODULATION. 5V nominal DC switcher's voltage input. Switching converter has a total of 16 pins. In particular, switching converter is a type of Switching Regulator or Controllers. 3V should be the minimum input voltage for the dc dc voltage regulator. Test statistics indicate DC regulator outputs 2.75V voltage. The dc to dc regulator is limited to 15V input voltage. If you are starting a new project, you should note the dc dc regulator's typical output current is 1.7kA. The duty cycle of the voltage regulator dc to dc can be set to 95 % on power-up or power-down to ensure reliability. As DC switcher has a Surface Mount, it's suitable for most applications and prototype designs. There is a possibility that a current higher than 10mA will cause improper operation of the component and possibly damage switching voltage regulators.
SC2672STRT Features
Transistor Driver Outputs
Switching Frequency: 300kHz
Enable, Power Good, Soft Start
PULSE WIDTH MODULATION
Max Duty Cycle: 95 %
SC2672STRT Applications
There are a lot of Semtech Corporation SC2672STRT DC to DC converter applications.
- Mobile phones
- CNC system
- Computer rooms
- Magnetohydrodynamic power
- Constant current circuits
- Various precision measuring instruments
- Injection molding machinery
- Smoke exhaust equipment
- Elevator lighting
- Packaging
