SC26C562C1A,518
| Parameters | |
|---|---|
| Mounting Type | Surface Mount |
| Package / Case | 52-LCC (J-Lead) |
| Surface Mount | YES |
| Packaging | Tape & Reel (TR) |
| Published | 2006 |
| Pbfree Code | yes |
| Part Status | Obsolete |
| Moisture Sensitivity Level (MSL) | 3 (168 Hours) |
| Number of Terminations | 52 |
| HTS Code | 8542.31.00.01 |
| Technology | CMOS |
| Voltage - Supply | 4.5V~5.5V |
| Terminal Position | QUAD |
| Terminal Form | J BEND |
| Peak Reflow Temperature (Cel) | 245 |
| Supply Voltage | 5V |
| Terminal Pitch | 1.27mm |
| Reach Compliance Code | unknown |
| Time@Peak Reflow Temperature-Max (s) | 40 |
| Base Part Number | SC26C562 |
| Pin Count | 52 |
| JESD-30 Code | S-PQCC-J52 |
| Qualification Status | Not Qualified |
| Operating Temperature (Max) | 70°C |
| Temperature Grade | COMMERCIAL |
| Interface | DMA |
| Number of I/O | 8 |
| uPs/uCs/Peripheral ICs Type | SERIAL IO/COMMUNICATION CONTROLLER, MULTI PROTOCOL |
| Clock Frequency | 16MHz |
| Supply Current-Max | 80mA |
| Address Bus Width | 6 |
| Boundary Scan | NO |
| Low Power Mode | NO |
| External Data Bus Width | 8 |
| Number of Serial I/Os | 2 |
| Bus Compatibility | 8086; IAPX 86 |
| Data Transfer Rate-Max | 1.25 MBps |
| Communication Protocol | ASYNC, BIT; SYNC, BYTE; SYNC, HDLC; SYNC, SDLC; X.25; X.75; BISYNC; EXT SYNC; ADCCP; DDCMP |
| Data Encoding/Decoding Method | NRZ; NRZI; BIPH-MARK(FM1); BIPH-SPACE(FM0); BIPH-LEVEL(MANCHESTER) |
| Height Seated (Max) | 4.57mm |
| Length | 19.125mm |
| Width | 19.125mm |
| RoHS Status | ROHS3 Compliant |
SC26C562C1A,518 Overview
It fits well with the package [0].It comes in a case with a [0].Surface Mountis used to install this component.The ability to supply 4.5V~5.5V volts is available with certain devices.Based on the [0], related parts can be found.The number of terminations is 52.Make sure this device is set to 5V.A device's operation is controlled by the 52pins.The potentiometer conducts in a supply voltage of 70°C.In this device, there are SERIAL IO/COMMUNICATION CONTROLLER, MULTI PROTOCOL uPs, uCs, or peripheral ICs.Ideally, its output frequency should not exceed 16MHz.The device has 8I/Os programmed.In the interface IC, there are 2 serial I/Os.
SC26C562C1A,518 Features
It is based on SC26C562.
Set the part at 5V volts
SERIAL IO/COMMUNICATION CONTROLLER, MULTI PROTOCOL of uPs/uCs/Peripheral ICs Type
Number of Serial I/Os : 2
SC26C562C1A,518 Applications
There are a lot of NXP USA Inc. SC26C562C1A,518 Specialized Interface ICs applications.
- Microprocessor controlled systems
- Public switching systems and PBX interfaces
- Modems
- Ultrasound
- Existing multiplexer applications (both fault-protected and
- Precision data acquisition
- ?Digital access cross connects
- Digital Cross-Connects
- Multiplexers
- Audio/video switches
