SC26C92A1A,512
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Mounting Type | Surface Mount |
| Package / Case | 44-LCC (J-Lead) |
| Surface Mount | YES |
| Packaging | Tube |
| Published | 2004 |
| JESD-609 Code | e3 |
| Feature | Configurable GPIO, Internal Oscillator, Timer/Counter |
| Part Status | Obsolete |
| Moisture Sensitivity Level (MSL) | 3 (168 Hours) |
| Number of Terminations | 44 |
| Terminal Finish | Tin (Sn) |
| HTS Code | 8542.31.00.01 |
| Subcategory | Serial IO/Communication Controllers |
| Technology | CMOS |
| Voltage - Supply | 5V |
| Terminal Position | QUAD |
| Terminal Form | J BEND |
| Peak Reflow Temperature (Cel) | 245 |
| Supply Voltage | 5V |
| Terminal Pitch | 1.27mm |
| Time@Peak Reflow Temperature-Max (s) | 30 |
| Base Part Number | SC26C92 |
| Pin Count | 44 |
| JESD-30 Code | S-PQCC-J44 |
| Qualification Status | Not Qualified |
| Operating Temperature (Max) | 85°C |
| Operating Temperature (Min) | -40°C |
| Power Supplies | 5V |
| Temperature Grade | INDUSTRIAL |
| Number of Channels | 2, DUART |
| Number of I/O | 15 |
| uPs/uCs/Peripheral ICs Type | SERIAL IO/COMMUNICATION CONTROLLER, SERIAL |
| Clock Frequency | 8MHz |
| Supply Current-Max | 25mA |
| Address Bus Width | 4 |
| Boundary Scan | NO |
| Low Power Mode | YES |
| External Data Bus Width | 8 |
| Data Rate (Max) | 1Mbps |
| Number of Serial I/Os | 2 |
| Data Transfer Rate-Max | 0.125 MBps |
| Communication Protocol | ASYNC, BIT |
| Data Encoding/Decoding Method | NRZ |
| FIFO's | 8 Byte |
| With Modem Control | Yes |
| Height Seated (Max) | 4.57mm |
| Length | 16.585mm |
| Width | 16.585mm |
| RoHS Status | ROHS3 Compliant |
SC26C92A1A,512 Overview
There is a cost-effective package 44-LCC (J-Lead) available.Transmission uses 2, DUART channels.Tube is adopted for packaging.There is a SERIAL IO/COMMUNICATION CONTROLLER, SERIAL used as the type of uPS/uCs/peripheral ICs.Configuration of this device involves 44 terminations.The device operates at 5V voltage.This electronic part is Obsolete at present.Data communication is handled by 2 serial I/Os.The mount can be accessed via the Surface Mount method.UART operates wUARTh the supply voltage of 5V.This device is an integrated circuit with 44 pins.IC clock frequency is set to 8MHz.Various similarities make it an appropriate candidate for inclusion in the subcategory of Serial IO/Communication Controllers.The object possesses some characteristics that are similar to Configurable GPIO, Internal Oscillator, Timer/Counter.The device is capable of operating at a maximum temperature of 85°C.Providing power supplies of 5V makes it reliable and efficient for electronic designers.As a base part number, it is specified as SC26C92.It is able to operate at the minimum temperature of -40°C.Universal asynchronous receiver-transmitter is possible to transfer data using 15 I/Os.A maximum supply current of 25mA is acceptable.
SC26C92A1A,512 Features
2 serial I/Os
Clock frequency of 8MHz
Power supplies of 5V
15 I/Os
SC26C92A1A,512 Applications
There are a lot of NXP USA Inc. SC26C92A1A,512 UARTs applications.
- GPS Systems
- Wireless Infrared Data Communications Systems
- Ethernet Network Routers
- Network Management
- Portable and battery operated devices
- Telecommunication Network Routers
- Battery Operated Instruments
- Serial to Parallel/Parallel to Serial Converter
- Point-of- Sale Terminals
- Factory automation and process control
