SC26C92A1A,518
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Mounting Type | Surface Mount |
| Package / Case | 44-LCC (J-Lead) |
| Surface Mount | YES |
| Packaging | Tape & Reel (TR) |
| Published | 2004 |
| JESD-609 Code | e3 |
| Feature | Configurable GPIO, Internal Oscillator, Timer/Counter |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 3 (168 Hours) |
| Number of Terminations | 44 |
| Terminal Finish | TIN |
| HTS Code | 8542.31.00.01 |
| Technology | CMOS |
| Voltage - Supply | 5V |
| Terminal Position | QUAD |
| Terminal Form | J BEND |
| Peak Reflow Temperature (Cel) | 245 |
| Supply Voltage | 5V |
| Terminal Pitch | 1.27mm |
| Time@Peak Reflow Temperature-Max (s) | 30 |
| Base Part Number | SC26C92 |
| Pin Count | 44 |
| JESD-30 Code | S-PQCC-J44 |
| Qualification Status | Not Qualified |
| Operating Temperature (Max) | 85°C |
| Operating Temperature (Min) | -40°C |
| Temperature Grade | INDUSTRIAL |
| Number of Channels | 2, DUART |
| Number of I/O | 15 |
| uPs/uCs/Peripheral ICs Type | SERIAL IO/COMMUNICATION CONTROLLER, SERIAL |
| Clock Frequency | 8MHz |
| Supply Current-Max | 25mA |
| Address Bus Width | 4 |
| Boundary Scan | NO |
| Low Power Mode | YES |
| External Data Bus Width | 8 |
| Data Rate (Max) | 1Mbps |
| Number of Serial I/Os | 2 |
| Data Transfer Rate-Max | 0.125 MBps |
| Communication Protocol | ASYNC, BIT |
| Data Encoding/Decoding Method | NRZ |
| FIFO's | 8 Byte |
| With Modem Control | Yes |
| Height Seated (Max) | 4.57mm |
| Length | 16.5862mm |
| Width | 16.5862mm |
| RoHS Status | ROHS3 Compliant |
SC26C92A1A,518 Overview
In order to make it more cost-effective, this product is also available in a package of 44-LCC (J-Lead).The transmission of information is carried out through 2, DUART channels.For packaging purposes, Tape & Reel (TR) is used.There is a SERIAL IO/COMMUNICATION CONTROLLER, SERIAL used as the type of uPS/uCs/peripheral ICs.As part of its configuration, it uses 44 terminations.To operate it, 5V is provided as the supply voltage.As of right now, this electronic part is in a Active status.There are 2 serial I/Os working as a way for data communication.Mounting is possible through Surface Mount.During operation, the supply voltage is set to 5V.There are 44 pins on this electronic device.This IC operates at a clock frequency of 8MHz.A few characteristics of Configurable GPIO, Internal Oscillator, Timer/Counter can be found in it.Temperatures up to 85°C are possible to operate it.In order to identify this part, its base part number is SC26C92.In order to operate, the device must be kept at a minimum temperature of -40°C.There are 15 I/Os designed to transfer data.The acceptable maximum supply current reaches 25mA.
SC26C92A1A,518 Features
2 serial I/Os
Clock frequency of 8MHz
15 I/Os
SC26C92A1A,518 Applications
There are a lot of NXP USA Inc. SC26C92A1A,518 UARTs applications.
- Industrial computing
- Ethernet Network Routers
- Cellular data devices
- Point-of-Sale Systems
- Handheld Terminal
- Portable Applications
- Infrared Transceivers
- Cellular Data
- Battery Operated Instruments
- Personal Digital Assistants Modules
