SC26C92C1A-T
| Parameters | |
|---|---|
| Surface Mount | YES |
| Number of Pins | 44 |
| JESD-609 Code | e3 |
| Moisture Sensitivity Level (MSL) | 3 |
| Number of Terminations | 44 |
| Terminal Finish | TIN |
| Additional Feature | ALSO OPERATES AT 2.5V SUPPLY |
| HTS Code | 8542.31.00.01 |
| Technology | CMOS |
| Terminal Position | QUAD |
| Terminal Form | J BEND |
| Peak Reflow Temperature (Cel) | 245 |
| Supply Voltage | 5V |
| Terminal Pitch | 1.27mm |
| Time@Peak Reflow Temperature-Max (s) | 30 |
| Pin Count | 44 |
| Qualification Status | Not Qualified |
| Operating Temperature (Max) | 70°C |
| Supply Voltage-Max (Vsup) | 5.5V |
| Temperature Grade | COMMERCIAL |
| Supply Voltage-Min (Vsup) | 4.5V |
| Number of I/O | 15 |
| uPs/uCs/Peripheral ICs Type | SERIAL IO/COMMUNICATION CONTROLLER, SERIAL |
| Clock Frequency | 8MHz |
| Supply Current-Max | 25mA |
| Data Rate | 230 kbps |
| Address Bus Width | 4 |
| Boundary Scan | NO |
| Low Power Mode | YES |
| External Data Bus Width | 8 |
| Number of Serial I/Os | 2 |
| Data Transfer Rate-Max | 0.125 MBps |
| Communication Protocol | ASYNC, BIT |
| Source Url Status Check Date | 2013-06-14 00:00:00 |
| Data Encoding/Decoding Method | NRZ |
| Height Seated (Max) | 4.57mm |
| Length | 16.5862mm |
| Width | 16.5862mm |
| RoHS Status | RoHS Compliant |
| Lead Free | Lead Free |
SC26C92C1A-T Overview
The type uPs/uCs/Peripheral ICs is SERIAL IO/COMMUNICATION CONTROLLER, SERIAL.In its configuration, 44 terminations are used.In order to operate it, a supply voltage of 5V is required.There are 2 serial I/Os available for communication of data.This electronic device is a type of 44-pin IC.A frequency of 8MHz is measured for this IC.A configuration of the chip is determined by its 44 pins.UART is able to operate at the maximum temperature of 70°C.Moreover, it is also able to perform ALSO OPERATES AT 2.5V SUPPLY.By maintaining the supply voltage below 5.5V, normal operation can be assured.A total of 15 I/Os are available for data transfer.Maintaining a voltage above 4.5V will ensure normal operation.The acceptable maximum supply current reaches 25mA.
SC26C92C1A-T Features
2 serial I/Os
Clock frequency of 8MHz
ALSO OPERATES AT 2.5V SUPPLY
15 I/Os
SC26C92C1A-T Applications
There are a lot of NXP Semiconductors / Freescale SC26C92C1A-T UARTs applications.
- Factory automation and process control
- Telecommunication Network Routers
- Infrared Transceivers
- Cellular data devices
- Handheld Terminals and Tablets
- Multi serial ports RS-232/RS-422/RS-485 Cards
- Wireless Infrared Data Communications Systems
- Cellular Data
- Personal Digital Assistants Modules
- Communications equipment
