SC26C92C1A,529
| Parameters | |
|---|---|
| Base Part Number | SC26C92 |
| Pin Count | 44 |
| JESD-30 Code | S-PQCC-J44 |
| Qualification Status | Not Qualified |
| Operating Temperature (Max) | 70°C |
| Temperature Grade | COMMERCIAL |
| Number of Channels | 2, DUART |
| Number of I/O | 15 |
| uPs/uCs/Peripheral ICs Type | SERIAL IO/COMMUNICATION CONTROLLER, SERIAL |
| Clock Frequency | 8MHz |
| Supply Current-Max | 25mA |
| Address Bus Width | 4 |
| Boundary Scan | NO |
| Low Power Mode | YES |
| External Data Bus Width | 8 |
| Data Rate (Max) | 1Mbps |
| Number of Serial I/Os | 2 |
| Data Transfer Rate-Max | 0.125 MBps |
| Communication Protocol | ASYNC, BIT |
| Data Encoding/Decoding Method | NRZ |
| FIFO's | 8 Byte |
| With Modem Control | Yes |
| Height Seated (Max) | 4.57mm |
| Length | 16.5862mm |
| Width | 16.5862mm |
| RoHS Status | ROHS3 Compliant |
| Factory Lead Time | 1 Week |
| Mounting Type | Surface Mount |
| Package / Case | 44-LCC (J-Lead) |
| Surface Mount | YES |
| Packaging | Tube |
| Published | 2000 |
| JESD-609 Code | e3 |
| Feature | Configurable GPIO, Internal Oscillator, Timer/Counter |
| Part Status | Obsolete |
| Moisture Sensitivity Level (MSL) | 3 (168 Hours) |
| Number of Terminations | 44 |
| Terminal Finish | TIN |
| HTS Code | 8542.31.00.01 |
| Technology | CMOS |
| Voltage - Supply | 5V |
| Terminal Position | QUAD |
| Terminal Form | J BEND |
| Peak Reflow Temperature (Cel) | 245 |
| Supply Voltage | 5V |
| Terminal Pitch | 1.27mm |
| Time@Peak Reflow Temperature-Max (s) | 30 |
SC26C92C1A,529 Overview
UART is available in the cost-effective 44-LCC (J-Lead) package.Transmission uses 2, DUART channels.When UART comes to packaging, Tube is adopted as the packaging method.Its uPs/uCs/Peripheral ICs type is SERIAL IO/COMMUNICATION CONTROLLER, SERIAL.A configuration of 44 terminations is used.For its operation, it requires a supply voltage of 5V.As of right now, this electronic part is in a Obsolete status.There are 2 serial I/Os working as a way for data communication.UART can be mounted through a way of Surface Mount.There is a voltage supply of 0 volts for the device.An IC with 44 pins is what this device is.IC clock frequency is set to 8MHz.Several characteristics of Configurable GPIO, Internal Oscillator, Timer/Counter are present in it.The device is capable of operating at a maximum temperature of 70°C.There is a default setting for the base part number of the part to be SC26C92.Transferring data is not possible with 15 I/Os.Supply currents above 25mA are acceptable.
SC26C92C1A,529 Features
2 serial I/Os
Clock frequency of 8MHz
15 I/Os
SC26C92C1A,529 Applications
There are a lot of NXP USA Inc. SC26C92C1A,529 UARTs applications.
- Industrial computing
- Battery Operated Instruments
- Portable Applications
- Infrared Transceivers
- Battery Operated Electronics
- Multimedia Systems
- Personal Digital Assistants
- Multi serial ports RS-232/RS-422/RS-485 Cards
- Point-of-Sale Systems
- Cellular Phones DataPort
