SC28C94A1A,518
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Mounting Type | Surface Mount |
| Package / Case | 52-LCC (J-Lead) |
| Surface Mount | YES |
| Packaging | Tape & Reel (TR) |
| Published | 2006 |
| JESD-609 Code | e3 |
| Feature | Internal Oscillator, Timer/Counter |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 3 (168 Hours) |
| Number of Terminations | 52 |
| Terminal Finish | TIN |
| HTS Code | 8542.31.00.01 |
| Technology | CMOS |
| Voltage - Supply | 5V |
| Terminal Position | QUAD |
| Terminal Form | J BEND |
| Peak Reflow Temperature (Cel) | 245 |
| Supply Voltage | 5V |
| Terminal Pitch | 1.27mm |
| Time@Peak Reflow Temperature-Max (s) | 30 |
| Base Part Number | SC28C94A |
| Pin Count | 52 |
| JESD-30 Code | S-PQCC-J52 |
| Qualification Status | Not Qualified |
| Operating Temperature (Max) | 85°C |
| Operating Temperature (Min) | -40°C |
| Temperature Grade | INDUSTRIAL |
| Number of Channels | 4, QUART |
| uPs/uCs/Peripheral ICs Type | SERIAL IO/COMMUNICATION CONTROLLER, SERIAL |
| Clock Frequency | 8MHz |
| Address Bus Width | 6 |
| Boundary Scan | NO |
| Low Power Mode | YES |
| External Data Bus Width | 8 |
| Data Rate (Max) | 1Mbps |
| Number of Serial I/Os | 4 |
| Data Transfer Rate-Max | 0.125 MBps |
| Communication Protocol | ASYNC, BIT |
| FIFO's | 8 Byte |
| With Modem Control | Yes |
| Height Seated (Max) | 4.57mm |
| Length | 19.125mm |
| Width | 19.125mm |
| RoHS Status | ROHS3 Compliant |
SC28C94A1A,518 Overview
The 52-LCC (J-Lead) package is the most cost-effective.Transmission uses 4, QUART channels.Tape & Reel (TR) is adopted as the packaging option.The type uPs/uCs/Peripheral ICs of this circuit is SERIAL IO/COMMUNICATION CONTROLLER, SERIAL.A configuration of 52 terminations is used.In order to operate it, a supply voltage of 5V is required.At present, this electronic part has a status of Active.In order to communicate data, there are 4 serial I/Os.The mount can be accessed via the Surface Mount method.UART operates wUARTh the supply voltage of 5V.An 52-pin integrated circuit is what this particular device is.IC clock frequency is set to 8MHz.A few characteristics of Internal Oscillator, Timer/Counter can be found in it.UART can operate at a maximum temperature of 85°C.In order to identify this part, its base part number is SC28C94A.A minimum of -40°C is required for operation.
SC28C94A1A,518 Features
4 serial I/Os
Clock frequency of 8MHz
SC28C94A1A,518 Applications
There are a lot of NXP USA Inc. SC28C94A1A,518 UARTs applications.
- DTE for Modem Communication Systems
- Remote Access Servers
- Point-of-Sale Systems
- Battery Operated Instruments
- Personal Digital Assistants
- Ethernet Network to Serial Ports
- Industrial computing
- Portable and battery operated devices
- Wireless Portable Point-of-Sale Terminals
- Gaming Terminals
