SC28C94A1N,112

5V V 4.9mm mm 15.24mm mm 85°C °C Interface - UARTs (Universal Asynchronous Receiver Transmitter) 62.1mm mm CMOS 48 48

Manufacturer: NXP USA Inc.
Nocochips NO: 568-SC28C94A1N,112
Package: 48-DIP (0.600, 15.24mm)
Datasheet: PDF
Stock: 738
Description: 5V V 4.9mm mm 15.24mm mm 85°C °C Interface - UARTs (Universal Asynchronous Receiver Transmitter) 62.1mm mm CMOS 48 48 (Kg)

Details

Tags

Parameters
Mounting Type	Through Hole
Package / Case	48-DIP (0.600, 15.24mm)
Surface Mount	NO
Packaging	Tube
Published	2006
Feature	Internal Oscillator, Timer/Counter
Part Status	Obsolete
Moisture Sensitivity Level (MSL)	1 (Unlimited)
Number of Terminations	48
HTS Code	8542.31.00.01
Technology	CMOS
Voltage - Supply	5V
Terminal Position	DUAL
Supply Voltage	5V
Terminal Pitch	2.54mm
Base Part Number	SC28C94A
Pin Count	48
JESD-30 Code	R-PDIP-T48
Qualification Status	Not Qualified
Operating Temperature (Max)	85°C
Operating Temperature (Min)	-40°C
Temperature Grade	INDUSTRIAL
Number of Channels	4, QUART
uPs/uCs/Peripheral ICs Type	SERIAL IO/COMMUNICATION CONTROLLER, SERIAL
Clock Frequency	8MHz
Address Bus Width	6
Boundary Scan	NO
Low Power Mode	YES
External Data Bus Width	8
Data Rate (Max)	1Mbps
Number of Serial I/Os	4
Data Transfer Rate-Max	0.125 MBps
Communication Protocol	ASYNC, BIT
FIFO's	8 Byte
With Modem Control	Yes
Height Seated (Max)	4.9mm
Length	62.1mm
Width	15.24mm
RoHS Status	ROHS3 Compliant

SC28C94A1N,112 Overview

In the 48-DIP (0.600, 15.24mm) package, you can get the product at a low cost.The transmission of information is carried out through 4, QUART channels.Tube is used in terms of packaging.As its uP/uC/Peripheral ICs type, SERIAL IO/COMMUNICATION CONTROLLER, SERIAL is used.There are 48 terminations used in its configuration.In order to operate it, a supply voltage of 5V is required.At present, this electronic part is in the state of Obsolete.Data is communicated via 4 serial I/Os.Mounting it through Through Hole is possible.This device operates with a supply voltage of 5V.This electronic device belongs to the 48-pin IC family.IC clock frequency is set to 8MHz.Several characteristics of Internal Oscillator, Timer/Counter can be observed in it.Temperatures as high as 85°C can be reached by the device.SC28C94A is used as its base part number.Temperatures as low as -40°C are acceptable to it.