SC28L194A1A,518
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Mounting Type | Surface Mount |
| Package / Case | 68-LCC (J-Lead) |
| Surface Mount | YES |
| Packaging | Tape & Reel (TR) |
| Published | 2003 |
| JESD-609 Code | e3 |
| Feature | Internal Oscillator, Timer/Counter |
| Part Status | Obsolete |
| Moisture Sensitivity Level (MSL) | 3 (168 Hours) |
| Number of Terminations | 68 |
| Terminal Finish | Tin (Sn) |
| Additional Feature | ALSO OPERATES AT 3.3V SUPPLY AT 20 MHZ |
| HTS Code | 8542.31.00.01 |
| Subcategory | Serial IO/Communication Controllers |
| Technology | CMOS |
| Voltage - Supply | 3.3V 5V |
| Terminal Position | QUAD |
| Terminal Form | J BEND |
| Peak Reflow Temperature (Cel) | 245 |
| Supply Voltage | 5V |
| Terminal Pitch | 1.27mm |
| Time@Peak Reflow Temperature-Max (s) | NOT SPECIFIED |
| Base Part Number | SC28L194A |
| Pin Count | 68 |
| JESD-30 Code | S-PQCC-J68 |
| Qualification Status | Not Qualified |
| Operating Temperature (Max) | 85°C |
| Operating Temperature (Min) | -40°C |
| Power Supplies | 3.3/5V |
| Temperature Grade | INDUSTRIAL |
| Number of Channels | 4, QUART |
| Number of I/O | 4 |
| uPs/uCs/Peripheral ICs Type | SERIAL IO/COMMUNICATION CONTROLLER, SERIAL |
| Clock Frequency | 33MHz |
| Supply Current-Max | 35mA |
| Address Bus Width | 7 |
| Boundary Scan | NO |
| Low Power Mode | YES |
| External Data Bus Width | 8 |
| Number of Serial I/Os | 4 |
| Data Transfer Rate-Max | 0.125 MBps |
| Communication Protocol | ASYNC, BIT |
| Data Encoding/Decoding Method | NRZ |
| FIFO's | 16 Byte |
| With Modem Control | Yes |
| Height Seated (Max) | 4.57mm |
| Length | 24.23mm |
| Width | 24.23mm |
| RoHS Status | ROHS3 Compliant |
SC28L194A1A,518 Overview
In addition, it is available in the cost-effective package 68-LCC (J-Lead).Transmission is done through 4, QUART channels.Tape & Reel (TR) is adopted for packaging.Its uPs/uCs/Peripheral ICs use SERIAL IO/COMMUNICATION CONTROLLER, SERIAL.Configuration of this device involves 68 terminations.UART operates on 5V supply voltage.This electronic part is Obsolete at present.As a way to communicate data, the board has 4 serial I/Os.Through Surface Mount, it can be mounted.With a supply voltage of 3.3V 5V, it operates.This device is an integrated circuit with 68 pins.IC clock frequency is set to 33MHz.UART has been grouped under the subcategory Serial IO/Communication Controllers on account of UARTs similarUARTies.A few characteristics of Internal Oscillator, Timer/Counter can be found in it.Operating at 85°C is its maximum temperature limit.In the case of 3.3/5V power supplies, it is reliable and efficient to use by electronic designers.Moreover, it is also able to perform ALSO OPERATES AT 3.3V SUPPLY AT 20 MHZ.A base part number of SC28L194A is used for this product.The device can be operated at temperatures as low as -40°C.To transfer data, there are 4 I/Os.It reaches 35mA when the maximum supply current is acceptable.
SC28L194A1A,518 Features
4 serial I/Os
Clock frequency of 33MHz
Power supplies of 3.3/5V
ALSO OPERATES AT 3.3V SUPPLY AT 20 MHZ
4 I/Os
SC28L194A1A,518 Applications
There are a lot of NXP USA Inc. SC28L194A1A,518 UARTs applications.
- Infrared Transceivers
- Domestic Applications
- DTE for Modem Communication Systems
- Multi-port RS-232/RS-422/RS-485 Cards
- Ethernet Network to Serial Ports
- Handheld Computers
- Serial to Parallel/Parallel to Serial Converter
- Universal PCI Bus Add-in Card
- Cellular Data
- White goods
