SC28L201A1DGG,118
| Parameters | |
|---|---|
| Mounting Type | Surface Mount |
| Package / Case | 48-TFSOP (0.240, 6.10mm Width) |
| Surface Mount | YES |
| Packaging | Tape & Reel (TR) |
| Published | 2005 |
| Series | Impact |
| JESD-609 Code | e4 |
| Feature | Configurable GPIO, Internal Oscillator, Timer/Counter |
| Part Status | Obsolete |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 48 |
| Terminal Finish | NICKEL PALLADIUM GOLD |
| HTS Code | 8542.31.00.01 |
| Technology | CMOS |
| Voltage - Supply | 3.3V 5V |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Supply Voltage | 5V |
| Terminal Pitch | 0.5mm |
| Reach Compliance Code | unknown |
| Time@Peak Reflow Temperature-Max (s) | 30 |
| Base Part Number | SC28L201A |
| Pin Count | 48 |
| JESD-30 Code | R-PDSO-G48 |
| Qualification Status | Not Qualified |
| Operating Temperature (Max) | 85°C |
| Operating Temperature (Min) | -40°C |
| Temperature Grade | INDUSTRIAL |
| Number of Channels | 1, UART |
| uPs/uCs/Peripheral ICs Type | SERIAL IO/COMMUNICATION CONTROLLER, SERIAL |
| Clock Frequency | 50MHz |
| Address Bus Width | 7 |
| Protocol | RS485 |
| Boundary Scan | NO |
| Low Power Mode | YES |
| External Data Bus Width | 8 |
| Data Rate (Max) | 3.125Mbps |
| Number of Serial I/Os | 1 |
| Bus Compatibility | 68000; 80XXX |
| Data Transfer Rate-Max | 0.25 MBps |
| FIFO's | 256 Byte |
| With Modem Control | Yes |
| Height Seated (Max) | 1.2mm |
| Length | 12.5mm |
| Width | 6.1mm |
| RoHS Status | ROHS3 Compliant |
SC28L201A1DGG,118 Overview
In addition, it is available in the cost-effective package 48-TFSOP (0.240, 6.10mm Width).Transmission uses 1, UART channels.Tape & Reel (TR) is adopted for packaging.There is a SERIAL IO/COMMUNICATION CONTROLLER, SERIAL used as the type of uPS/uCs/peripheral ICs.Configured with 48 terminations.The device operates at 5V voltage.At present, this electronic part has a status of Obsolete.A total of 1 serial I/Os are used to communicate data.A method of mounting it is through Surface Mount.This device operates with a supply voltage of 3.3V 5V.There are 48 pins on this electronic device.Its clock frequency is measured at 50MHz.The object possesses some characteristics that are similar to Configurable GPIO, Internal Oscillator, Timer/Counter.A maximum temperature of 85°C is possible for it to operate at.There is a default setting for the base part number of the part to be SC28L201A.The device can be operated at temperatures as low as -40°C.The electronic component has been designated as a member of the Impact series.
SC28L201A1DGG,118 Features
1 serial I/Os
Clock frequency of 50MHz
SC28L201A1DGG,118 Applications
There are a lot of NXP USA Inc. SC28L201A1DGG,118 UARTs applications.
- Communications equipment
- Cellular Data
- DTE for Modem Communication Systems
- Battery Operated Electronics
- Ethernet Network to Serial Ports
- Portable and battery operated devices
- Multimedia Systems
- Ethernet Network Routers
- Wireless Infrared Data Communications Systems
- White goods
