SC28L202A1DGG
| Parameters | |
|---|---|
| Package / Case | TSSOP |
| Surface Mount | YES |
| JESD-609 Code | e4 |
| Pbfree Code | yes |
| Moisture Sensitivity Level (MSL) | 1 |
| Number of Terminations | 56 |
| Terminal Finish | Nickel/Palladium/Gold (Ni/Pd/Au) |
| Max Operating Temperature | 85°C |
| Min Operating Temperature | -40°C |
| Additional Feature | ALSO OPERATES AT 3.3V SUPPLY |
| Subcategory | Serial IO/Communication Controllers |
| Technology | CMOS |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Supply Voltage | 5V |
| Terminal Pitch | 0.5mm |
| Time@Peak Reflow Temperature-Max (s) | 30 |
| Pin Count | 56 |
| JESD-30 Code | R-PDSO-G56 |
| Qualification Status | Not Qualified |
| Operating Supply Voltage | 5V |
| Temperature Grade | INDUSTRIAL |
| Number of Channels | 2 |
| Max Supply Voltage | 5.5V |
| Min Supply Voltage | 3V |
| Nominal Supply Current | 20mA |
| uPs/uCs/Peripheral ICs Type | SERIAL IO/COMMUNICATION CONTROLLER, SERIAL |
| Clock Frequency | 50MHz |
| Data Rate | 2 Mbps |
| Address Bus Width | 7 |
| Boundary Scan | NO |
| Low Power Mode | YES |
| External Data Bus Width | 8 |
| Number of Serial I/Os | 2 |
| Bus Compatibility | 68XXX; 80XXX |
| Data Transfer Rate-Max | 0.375 MBps |
| Communication Protocol | ASYNC, BIT |
| Data Encoding/Decoding Method | NRZ |
| Length | 14mm |
| Width | 6.1mm |
| RoHS Status | RoHS Compliant |
| Lead Free | Lead Free |
SC28L202A1DGG Overview
Alternatively, UART can be purchased in the cost-effective TSSOP package.UART is possible to transmUART on 2 channels.The type SERIAL IO/COMMUNICATION CONTROLLER, SERIAL is used for the uPs, uCs, and peripheral ICs on the board.Configured with 56 terminations.The supply voltage of 5V is provided for its operation.Data is communicated via 2 serial I/Os.There are 56 pins on this electronic device.A frequency of 50MHz is measured for this IC.A series of similarities lead us to include it in the subcategory of Serial IO/Communication Controllers.Ideally, the operating temperature should not exceed -40°C in order to ensure long-term performance.To maintain normal work for a long time, the operating temperature should not exceed 85°C.UART is possible to ensure reliabilUARTy by keeping the supply voltage below 5.5V.When the supply voltage is kept above 3V, reliability can be ensured.5V is the supply voltage provided for high-efficiency operation.Furthermore, it was shown to be capable of performing ALSO OPERATES AT 3.3V SUPPLY.
SC28L202A1DGG Features
2 serial I/Os
Clock frequency of 50MHz
Operating supply voltage of 5V
ALSO OPERATES AT 3.3V SUPPLY
SC28L202A1DGG Applications
There are a lot of NXP Semiconductors / Freescale SC28L202A1DGG UARTs applications.
- White goods
- Factory Automation and Process Controls
- Serial to Parallel/Parallel to Serial Converter
- Ethernet Network Routers
- Cellular Data
- Communications equipment
- Gaming Terminals
- Wireless Infrared Data Communications Systems
- Handheld Terminal
- Personal Digital Assistants
