SC28L202A1DGG,118

5V V 1.2mm mm 6.1mm mm 85°C °C Interface - UARTs (Universal Asynchronous Receiver Transmitter) 14mm mm CMOS 56 260 56

Manufacturer: NXP USA Inc.
Nocochips NO: 568-SC28L202A1DGG,118
Package: 56-TFSOP (0.240, 6.10mm Width)
Datasheet: PDF
Stock: 238
Description: 5V V 1.2mm mm 6.1mm mm 85°C °C Interface - UARTs (Universal Asynchronous Receiver Transmitter) 14mm mm CMOS 56 260 56 (Kg)

Details

Tags

Parameters
Factory Lead Time	1 Week
Mounting Type	Surface Mount
Package / Case	56-TFSOP (0.240, 6.10mm Width)
Surface Mount	YES
Packaging	Tape & Reel (TR)
Published	2003
Series	Impact
JESD-609 Code	e4
Feature	Configurable GPIO, Internal Oscillator, Timer/Counter
Part Status	Active
Moisture Sensitivity Level (MSL)	1 (Unlimited)
Number of Terminations	56
Terminal Finish	Nickel/Palladium/Gold (Ni/Pd/Au)
Additional Feature	ALSO OPERATES AT 3.3V SUPPLY
HTS Code	8542.31.00.01
Technology	CMOS
Voltage - Supply	3.3V 5V
Terminal Position	DUAL
Terminal Form	GULL WING
Peak Reflow Temperature (Cel)	260
Supply Voltage	5V
Terminal Pitch	0.5mm
Time@Peak Reflow Temperature-Max (s)	30
Base Part Number	SC28L202A
Pin Count	56
JESD-30 Code	R-PDSO-G56
Qualification Status	Not Qualified
Operating Temperature (Max)	85°C
Operating Temperature (Min)	-40°C
Temperature Grade	INDUSTRIAL
Number of Channels	1, UART
uPs/uCs/Peripheral ICs Type	SERIAL IO/COMMUNICATION CONTROLLER, SERIAL
Clock Frequency	50MHz
Address Bus Width	7
Protocol	RS485
Boundary Scan	NO
Low Power Mode	YES
External Data Bus Width	8
Data Rate (Max)	3.125Mbps
Number of Serial I/Os	2
Bus Compatibility	68XXX; 80XXX
Data Transfer Rate-Max	0.375 MBps
Data Encoding/Decoding Method	NRZ
FIFO's	256 Byte
With Modem Control	Yes
Height Seated (Max)	1.2mm
Length	14mm
Width	6.1mm
RoHS Status	ROHS3 Compliant

SC28L202A1DGG,118 Overview

Alternatively, UART can be purchased in the cost-effective 56-TFSOP (0.240, 6.10mm Width) package.The transmission of data takes place over 1, UART channels.As for packaging, Tape & Reel (TR) is chosen.The type SERIAL IO/COMMUNICATION CONTROLLER, SERIAL is used for the uPs, uCs, and peripheral ICs on the board.As part of its configuration, it uses 56 terminations.For its operation, it requires a supply voltage of 5V.At present, this electronic part has a status of Active.There are 2 serial I/Os working as a way for data communication.UART can be mounted through a way of Surface Mount.In order for it to operate, a voltage of 3.3V 5V must be applied.UART is a type of 56-pin integrated circuUART.This IC measures its clock frequency at 50MHz.There are some characteristics of Configurable GPIO, Internal Oscillator, Timer/Counter that are present in it.The device is capable of operating at a maximum temperature of 85°C.Moreover, it is also able to perform ALSO OPERATES AT 3.3V SUPPLY.In order to identify this part, its base part number is SC28L202A.At a minimum temperature of -40°C, it is capable of operating.The electronic component belongs to the series Impact.