SC28L202A1DGG,518
| Parameters | |
|---|---|
| Mount | Surface Mount |
| Package / Case | TSSOP |
| Number of Pins | 56 |
| Packaging | Tape and Reel |
| JESD-609 Code | e4 |
| Moisture Sensitivity Level (MSL) | 3 |
| Number of Terminations | 56 |
| Terminal Finish | NICKEL PALLADIUM GOLD |
| Max Operating Temperature | 85°C |
| Min Operating Temperature | -40°C |
| Additional Feature | ALSO OPERATES AT 3.3V SUPPLY |
| Technology | CMOS |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Supply Voltage | 5V |
| Terminal Pitch | 0.5mm |
| Time@Peak Reflow Temperature-Max (s) | 30 |
| Pin Count | 56 |
| Qualification Status | Not Qualified |
| Temperature Grade | INDUSTRIAL |
| Number of Channels | 2 |
| Max Supply Voltage | 5.5V |
| Min Supply Voltage | 3V |
| Nominal Supply Current | 20mA |
| uPs/uCs/Peripheral ICs Type | SERIAL IO/COMMUNICATION CONTROLLER, SERIAL |
| Clock Frequency | 50MHz |
| Data Rate | 3.125 Mbps |
| Address Bus Width | 7 |
| Boundary Scan | NO |
| Low Power Mode | YES |
| External Data Bus Width | 8 |
| Number of Serial I/Os | 2 |
| Bus Compatibility | 68XXX; 80XXX |
| Data Transfer Rate-Max | 0.375 MBps |
| Communication Protocol | ASYNC, BIT |
| Data Encoding/Decoding Method | NRZ |
| Length | 14mm |
| Width | 6.1mm |
| RoHS Status | RoHS Compliant |
SC28L202A1DGG,518 Overview
There is a cost-effective TSSOP package available for this product.Transmission is done through 2 channels.As for packaging, Tape and Reel is chosen.SERIAL IO/COMMUNICATION CONTROLLER, SERIAL is used as its uPs/uCs/Peripheral ICs type.There are 56 terminations used in its configuration.In order for it to operate, a voltage of 5V must be provided.In order to communicate data, there are 2 serial I/Os.An 56-pin integrated circuit is what this particular device is.There is 50MHz clock frequency measured on this IC.UART is important to keep the operating temperature below -40°C to ensure a long working period.UART is recommended that the operating temperature does not exceed 85°C to ensure long-term, normal performance.The 56 pins are at the core of the device's configuration.The device is mounted in accordance with Surface Mount.UART is possible to ensure reliabilUARTy by keeping the supply voltage below 5.5V.Supply voltages above 3V can ensure reliability.Additionally, it can perform ALSO OPERATES AT 3.3V SUPPLY.
SC28L202A1DGG,518 Features
2 serial I/Os
Clock frequency of 50MHz
ALSO OPERATES AT 3.3V SUPPLY
SC28L202A1DGG,518 Applications
There are a lot of NXP Semiconductors / Freescale SC28L202A1DGG,518 UARTs applications.
- Personal Digital Assistants
- Telecommunication Network Routers
- Cellular data devices
- Handheld Terminal
- Factory Automation
- Multimedia Systems
- GPS Devices
- Factory Automation and Process Controls
- Router C ontrol
- Cellular Phones DataPort
