SC28L92A1A,518
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Mounting Type | Surface Mount |
| Package / Case | 44-LCC (J-Lead) |
| Surface Mount | YES |
| Packaging | Tape & Reel (TR) |
| Published | 2004 |
| Series | Impact |
| JESD-609 Code | e3 |
| Feature | Configurable GPIO, Internal Oscillator, Timer/Counter |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 3 (168 Hours) |
| Number of Terminations | 44 |
| Terminal Finish | Tin (Sn) |
| Additional Feature | ALSO OPERATES AT 5V SUPPLY |
| HTS Code | 8542.31.00.01 |
| Subcategory | Serial IO/Communication Controllers |
| Technology | CMOS |
| Voltage - Supply | 3.3V 5V |
| Terminal Position | QUAD |
| Terminal Form | J BEND |
| Peak Reflow Temperature (Cel) | 245 |
| Supply Voltage | 3.3V |
| Terminal Pitch | 1.27mm |
| Time@Peak Reflow Temperature-Max (s) | 30 |
| Base Part Number | SC28L92A |
| Pin Count | 44 |
| JESD-30 Code | S-PQCC-J44 |
| Qualification Status | Not Qualified |
| Operating Temperature (Max) | 85°C |
| Operating Temperature (Min) | -40°C |
| Power Supplies | 3.3/5V |
| Temperature Grade | INDUSTRIAL |
| Number of Channels | 2, DUART |
| uPs/uCs/Peripheral ICs Type | SERIAL IO/COMMUNICATION CONTROLLER, SERIAL |
| Clock Frequency | 8MHz |
| Address Bus Width | 4 |
| Boundary Scan | NO |
| Low Power Mode | NO |
| External Data Bus Width | 8 |
| Data Rate (Max) | 1Mbps |
| Number of Serial I/Os | 2 |
| Bus Compatibility | 68XXX; 80XXX |
| Data Transfer Rate-Max | 0.125 MBps |
| Communication Protocol | ASYNC, BIT |
| FIFO's | 16 Byte |
| With Modem Control | Yes |
| Height Seated (Max) | 4.57mm |
| Length | 16.585mm |
| Width | 16.585mm |
| RoHS Status | ROHS3 Compliant |
SC28L92A1A,518 Overview
The package 44-LCC (J-Lead) offers the best value.There are 2, DUART channels used for transmission.As for packaging, Tape & Reel (TR) is chosen.The type uPs/uCs/Peripheral ICs of this circuit is SERIAL IO/COMMUNICATION CONTROLLER, SERIAL.As part of its configuration, it uses 44 terminations.The device operates at 3.3V voltage.At present, this electronic part has a status of Active.As a way to communicate data, the board has 2 serial I/Os.Surface Mount is a way to mount it.UART operates on a voltage of 3.3V 5V.An IC with 44 pins is what this device is.8MHz is the clock frequency of this integrated circuit.UART has been grouped under the subcategory Serial IO/Communication Controllers on account of UARTs similarUARTies.In some ways, it resembles Configurable GPIO, Internal Oscillator, Timer/Counter.Operating at 85°C is its maximum temperature limit.Providing power supplies of 3.3/5V makes it reliable and efficient for electronic designers.Moreover, it is also able to perform ALSO OPERATES AT 5V SUPPLY.SC28L92A is set as the base part number for the part.Temperatures as low as -40°C can be reached by this device.Universal asynchronous receiver-transmitter falls under the Impact series of electronic components.
SC28L92A1A,518 Features
2 serial I/Os
Clock frequency of 8MHz
Power supplies of 3.3/5V
ALSO OPERATES AT 5V SUPPLY
SC28L92A1A,518 Applications
There are a lot of NXP USA Inc. SC28L92A1A,518 UARTs applications.
- Serial to Parallel/Parallel to Serial Converter
- Network Management
- Factory automation and process control
- Cellular data devices
- Portable Appliances
- Handheld Computers
- Handheld Terminal
- Point-of-Sale Systems
- DTE for Modem Communication Systems
- Router C ontrol
