SC4201IMSTRT
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 8-TSSOP, 8-MSOP (0.118, 3.00mm Width) |
| Number of Pins | 8 |
| Operating Temperature | -40°C~125°C TJ |
| Packaging | Tape & Reel (TR) |
| Published | 2004 |
| JESD-609 Code | e3 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 8 |
| Terminal Finish | MATTE TIN |
| Subcategory | Power Management Circuits |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Supply Voltage | 5V |
| Terminal Pitch | 0.65mm |
| Frequency | 2MHz |
| Function | Step-Down |
| Number of Outputs | 4 |
| Output Voltage | 6V |
| Output Type | PWM Signal |
| Max Output Current | 10mA |
| Operating Supply Voltage | 6V |
| Supply Voltage-Max (Vsup) | 6V |
| Power Supplies | 5V |
| Supply Voltage-Min (Vsup) | 3V |
| Analog IC - Other Type | ANALOG CIRCUIT |
| Output Configuration | Positive |
| Output Current | 25mA |
| Voltage - Supply (Vcc/Vdd) | 3V~6V |
| Control Features | Frequency Control |
| Max Output Voltage | 6V |
| Topology | Buck |
| Min Input Voltage | 3V |
| Max Input Voltage | 6V |
| Supply Current-Max (Isup) | 2.6mA |
| Synchronous Rectifier | No |
| Nominal Input Voltage | 7V |
| Min Output Voltage | 3V |
| Clock Sync | Yes |
| Height | 950μm |
| Length | 3mm |
| Width | 3.1mm |
| RoHS Status | RoHS Compliant |
| Lead Free | Lead Free |
SC4201IMSTRT Overview
It comes in a 8-TSSOP, 8-MSOP (0.118, 3.00mm Width) package, so switching controller can be used for most applications. There is enough capacity in the dc motor controller to generate the output for the 4 input. A solid enclosure of Tape & Reel (TR) surrounds pmic. There are PWM Signal dc switching's output (s) that it can handle. 3V~6V is the supply voltage and the operating voltage of the dc control. Worked in an dc switcher with a -40°C~125°C TJ rating. dc dc regulator is made easier with Surface Mount. To provide efficient switching control, Frequency Control is included in the dcdc regulator. An analog IC with the ANALOG CIRCUIT signal is connected to the switch converters. There are a terminal (s) on the switching converters that are designed at DUAL. 8 terminations with various dc switching's functions. 8 pins are on switching converter. There is a particular type of Power Management Circuits in switching converter. Test statistics indicate DC regulator outputs 6V voltage. You should note down the dc dc regulator's usual output current of 25mA when you start a project. Because of DC switcher's Surface Mount, it is suitable for most prototype designs and applications. Switching controller operates at a frequency of 2MHz. When running the voltage regulator dc to dc in a circuit, users should apply 6V to ensure safety and reliability. Input voltage can be set to 7V for nominal working status. The maximum input voltage of this dc switcher is 6V, so users must limit the voltage accordingly. Voltage 5V is required for supply. Voltage 3V is needed for the supply. A dc switcher can only produce an output current of 10mA. The controller should not be supplied with more current than 2.6mA. The datasheet indicates that the switching converter can output 6V volts at its maximum. There is 3V voltage output lower than 3V on the voltage controller.
SC4201IMSTRT Features
PWM Signal Outputs
Frequency Control
Frequency: 2MHz
SC4201IMSTRT Applications
There are a lot of Semtech Corporation SC4201IMSTRT DC to DC converter applications.
- Hydraulic presses
- Medical monitoring systems
- Thermal power
- Product testing
- Various precision measuring detectors
- Photovoltaic power
- Electrical power transmission
- Overvoltage protection circuits in TV sets
- Remotely powered electric motors
- Special machining machine tools
