SC4508IMLTRT
| Parameters | |
|---|---|
| Mounting Type | Surface Mount |
| Package / Case | 12-VQFN Exposed Pad |
| Number of Pins | 12 |
| Supplier Device Package | 12-MLPQ (4x4) |
| Operating Temperature | -40°C~150°C TJ |
| Packaging | Tape & Reel (TR) |
| Published | 2012 |
| Part Status | Obsolete |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Max Operating Temperature | 150°C |
| Min Operating Temperature | -40°C |
| Frequency | 1.5MHz |
| Base Part Number | SC4508 |
| Function | Step-Down, Step-Up/Step-Down |
| Number of Outputs | 1 |
| Output Voltage | 1.27V |
| Output Type | Transistor Driver |
| Output Configuration | Positive |
| Output Current | 250mA |
| Voltage - Supply (Vcc/Vdd) | 2.7V~15V |
| Control Features | Enable, Frequency Control, Soft Start |
| Topology | Buck, Buck-Boost |
| Frequency - Switching | 100kHz~1.5MHz |
| Synchronous Rectifier | No |
| Clock Sync | No |
| Output Phases | 1 |
| Number of Output Phases | 1 |
| RoHS Status | RoHS Compliant |
| Lead Free | Lead Free |
SC4508IMLTRT Overview
In the 12-VQFN Exposed Pad package, the switching controller meets most application requirements. 1 outputs are supported by the dc motor controller. An enclosure of Tape & Reel (TR) is used to package the PMIC. Transistor Driver dc switching's outputs (s) are supported. 2.7V~15V is the supply voltage and the operating voltage of the dc control. Suitable for a -40°C~150°C TJ dc switcher. There is a switch at 100kHz~1.5MHz that can be used with this controller. It is suitable for general dc dc regulator when it is set to Surface Mount. For efficient switching control, the dcdc regulator features Enable, Frequency Control, Soft Start. Searching "SC4508" will return other relevant dc to dc converter ics. There are only 12 pins on switching converter. The test statistics indicate that DC regulator outputs a voltage of 1.27V. It's important to remember that the dc dc regulator's normaloutput current is 250mA, so you should note it down when starting a new project. 1.5MHz is the frequency of the switching controller. DC regulator should be kept at a temperature of -40°C or higher. DC regulator should run at a temperature of 150°C more than 150°C degrees Celsius. This part's supplier dc dc controller package would be 12-MLPQ (4x4). This controller switches with 1 phases.
SC4508IMLTRT Features
Transistor Driver Outputs
Switching Frequency: 100kHz~1.5MHz
Enable, Frequency Control, Soft Start
Frequency: 1.5MHz
SC4508IMLTRT Applications
There are a lot of Semtech Corporation SC4508IMLTRT DC to DC converter applications.
- Telecommunications equipment
- Gear/thread machining machines
- Computer application technology
- Radio equipment
- Solar power plants
- Arc suppression circuits
- Boring machines
- Correction machines
- Wind power
- Industrial robots
