SC4808AIMSTRT
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 10-TFSOP, 10-MSOP (0.118, 3.00mm Width) |
| Number of Pins | 10 |
| Operating Temperature | -40°C~150°C TJ |
| Packaging | Tape & Reel (TR) |
| Published | 2005 |
| JESD-609 Code | e3 |
| Pbfree Code | yes |
| Part Status | Obsolete |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 10 |
| ECCN Code | EAR99 |
| Terminal Finish | MATTE TIN |
| Additional Feature | CAN ALSO BE CONFIGURED IN CURRENT MODE |
| HTS Code | 8542.39.00.01 |
| Subcategory | Switching Regulator or Controllers |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Number of Functions | 1 |
| Terminal Pitch | 0.5mm |
| Frequency | 1MHz |
| Base Part Number | SC4808 |
| Pin Count | 10 |
| Output Voltage | 11.25V |
| Input Voltage-Nom | 12V |
| Analog IC - Other Type | SWITCHING CONTROLLER |
| Output Current | 250mA |
| Voltage - Supply (Vcc/Vdd) | 7.5V~18V |
| Control Features | Frequency Control, Sync |
| Input Voltage (Min) | 8.75V |
| Topology | Full-Bridge, Half-Bridge, Push-Pull |
| Control Mode | VOLTAGE-MODE |
| Frequency - Switching | Up to 1MHz |
| Control Technique | PULSE WIDTH MODULATION |
| Rise Time | 25ns |
| Fall Time (Typ) | 25 ns |
| Internal Switch(s) | No |
| Fault Protection | Current Limiting |
| Duty Cycle | 49% |
| Output Isolation | Isolated |
| Voltage - Start Up | 12V |
| Height Seated (Max) | 1.1mm |
| Length | 3mm |
| Width | 3mm |
| RoHS Status | RoHS Compliant |
| Lead Free | Lead Free |
SC4808AIMSTRT Overview
This ac to dc converter is included in the package 10-TFSOP, 10-MSOP (0.118, 3.00mm Width) .The ac dc converter is available in Tape & Reel (TR) case.There is a AC/DC converter mounted in the way of Surface Mount .The ac dc converter should be operated at a temperature of -40°C~150°C TJ °C to deliver its optimal performance.SWITCHING CONTROLLER analog ICs are employed in this AC DC converter.Switching frequency reaches Up to 1MHz Hz.This AC/DC converter is suitable for operation in the range of 7.5V~18V supply voltage (Vcc/Vdd).As a result, it has a total of 10 terminations.On this ac/dc converter, there are 10 pins.There are a total of 10 pins on the ac-dc converter.There are no problem mounting the ac dc converters by Surface Mount .A similar acdc converter can be searched by using the SC4808 family.The ac to dc conversions are included in Switching Regulator or Controllers .250mA is set as the output current.It produces a voltage of 11.25V .As long as AC to DC converter is operated at frequency 1MHz ,it is capable of attaining high efficiency.As a result of using this ACDC converter, CAN ALSO BE CONFIGURED IN CURRENT MODE can also be detected.
SC4808AIMSTRT Features
Packaged with 10-TFSOP, 10-MSOP (0.118, 3.00mm Width)
Switching Frequency at Up to 1MHz
With 10 pins
Output Current at 250mA
SC4808AIMSTRT Applications
There are a lot of Semtech Corporation SC4808AIMSTRT AC DC Converters applications.
- RCC SMPS
- Standby Power for General Off-Line Applications
- Automotive Infotainment
- Dimmers
- AC/DC Adaptors/Chargers for E-books
- Power adapters for monitors
- Digital cameras
- Linear Adapter Replacements
- AC/DC LED Driver applications
- White goods
