SC4808CMSTRT
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 10-TFSOP, 10-MSOP (0.118, 3.00mm Width) |
| Number of Pins | 10 |
| Operating Temperature | -40°C~105°C TA |
| Packaging | Tape & Reel (TR) |
| Published | 2006 |
| JESD-609 Code | e3 |
| Pbfree Code | yes |
| Part Status | Obsolete |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 10 |
| ECCN Code | EAR99 |
| Terminal Finish | MATTE TIN |
| Additional Feature | CAN ALSO BE CONFIGURED IN CURRENT MODE |
| Subcategory | Switching Regulator or Controllers |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Terminal Pitch | 0.5mm |
| Base Part Number | SC4808 |
| Function | Step-Up/Step-Down |
| Number of Outputs | 1 |
| Output Voltage | 18V |
| Output Type | Transistor Driver |
| Input Voltage-Nom | 12V |
| Analog IC - Other Type | SWITCHING CONTROLLER |
| Output Configuration | Positive, Isolation Capable |
| Output Current | 250A |
| Voltage - Supply (Vcc/Vdd) | 7V~16V |
| Max Supply Current | 20mA |
| Control Features | Current Limit, Frequency Control |
| Input Voltage (Min) | 7.5V |
| Topology | Full-Bridge, Half-Bridge, Push-Pull |
| Control Mode | VOLTAGE-MODE |
| Frequency - Switching | 50kHz~1MHz |
| Control Technique | PULSE WIDTH MODULATION |
| Rise Time | 25ns |
| Synchronous Rectifier | No |
| Fall Time (Typ) | 25 ns |
| Max Duty Cycle | 50 % |
| Duty Cycle (Max) | 49% |
| Clock Sync | Yes |
| Length | 3mm |
| Width | 3mm |
| RoHS Status | RoHS Compliant |
| Lead Free | Lead Free |
SC4808CMSTRT Overview
It comes in a 10-TFSOP, 10-MSOP (0.118, 3.00mm Width) package, so switching controller can be used for most applications. For 1 outputs, the dc motor controller is appropriate. The pmic is packaged in Tape & Reel (TR) solid enclosure. Transistor Driver dc switching's outputs (s) can be handled by it. The supply and operating voltage of the dc control are 7V~16V. Qualified to work in a -40°C~105°C TA dc switcher. With this switching controller, you can switch at 50kHz~1MHz. It is suitable for general dc dc regulator when it is set to Surface Mount. For efficient switching control, the dcdc regulator features Current Limit, Frequency Control. An analog IC with the SWITCHING CONTROLLER signal is connected to the switch converters. A switching converters's terminal (s) sits at the DUAL position. Various 10 terminations. PULSE WIDTH MODULATION is an example of one of the control techniques these dc dc converter ics adapt. DC switcher's voltage input of 12V. Searching "SC4808" will return other relevant dc to dc converter ics. Switching converter has a total of 10 pins. Particularly, switching converter is a type of Switching Regulator or Controllers. It is recommended that the dc dc voltage regulator's minimum input voltage be 7.5V. DC regulator outputs 18V voltage based on test statistics. In most cases, the dc dc regulator's output current is 250A. This information should be noted when you begin working with the component. Voltage regulator dc to dc is designed to operate at 50 % duty cycle during power-ups and power-downs to ensure reliability. In most applications and prototypes, DC switcher's Surface Mount makes it suitable. In order to satisfy the need, DC to DC voltage regulator has a value of CAN ALSO BE CONFIGURED IN CURRENT MODE. The component might suffer damage if the current exceeds 20mA.
SC4808CMSTRT Features
Transistor Driver Outputs
Switching Frequency: 50kHz~1MHz
Current Limit, Frequency Control
PULSE WIDTH MODULATION
Max Duty Cycle: 50 %
CAN ALSO BE CONFIGURED IN CURRENT MODE
SC4808CMSTRT Applications
There are a lot of Semtech Corporation SC4808CMSTRT DC to DC converter applications.
- Sensitive electronic devices
- Digital video recorders
- Alternators
- Bending machines
- Injection molding machinery
- Elevator lighting
- Automatic testing equipment
- Solar power plants
- Industrial robots
- Smoke prevention equipment
