SC4810BITSTRT
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 16-TSSOP (0.173, 4.40mm Width) |
| Number of Pins | 16 |
| Operating Temperature | -40°C~105°C TA |
| Packaging | Tape & Reel (TR) |
| JESD-609 Code | e3 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 16 |
| ECCN Code | EAR99 |
| Terminal Finish | Matte Tin (Sn) |
| Subcategory | Switching Regulator or Controllers |
| Technology | BICMOS |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Terminal Pitch | 0.65mm |
| Frequency | 1MHz |
| Time@Peak Reflow Temperature-Max (s) | 40 |
| Base Part Number | SC4810 |
| Function | Step-Up/Step-Down |
| Number of Outputs | 1 |
| Output Voltage | 500mV |
| Output Type | Transistor Driver |
| Input Voltage-Nom | 12V |
| Analog IC - Other Type | SWITCHING CONTROLLER |
| Output Configuration | Positive, Isolation Capable |
| Output Current | 5mA |
| Voltage - Supply (Vcc/Vdd) | 8.2V~15V |
| Control Features | Current Limit, Frequency Control, Ramp, Soft Start |
| Input Voltage (Min) | 6.8V |
| Topology | Forward Converter |
| Control Mode | CURRENT-MODE |
| Frequency - Switching | 50kHz~1MHz |
| Control Technique | PULSE WIDTH MODULATION |
| Rise Time | 10ns |
| Synchronous Rectifier | No |
| Fall Time (Typ) | 10 ns |
| Switcher Configuration | PUSH-PULL |
| Max Duty Cycle | 85 % |
| Clock Sync | Yes |
| Length | 5mm |
| Width | 4.4mm |
| RoHS Status | RoHS Compliant |
| Lead Free | Lead Free |
SC4810BITSTRT Overview
It comes in the 16-TSSOP (0.173, 4.40mm Width) package, which makes switching controller suitable for most applications. There is enough capacity in the dc motor controller to generate the output for the 1 input. A solid enclosure of Tape & Reel (TR) surrounds pmic. Transistor Driver dc switching's outputs (s) are supported. This dc control operates at 8.2V~15V and has a 8.2V~15V supply voltage. Qualified to work in an dc switcher with -40°C~105°C TA. This switching controller can switch at 50kHz~1MHz. A generalization of dc dc regulator can be made using Surface Mount. DCDC regulator is controlled efficiently by Current Limit, Frequency Control, Ramp, Soft Start. An analog IC with the SWITCHING CONTROLLER signal is connected to the switch converters. Switching converters are designed with the terminal (s) at position DUAL . A variety of 16 terminations are available in dc switching. The control methods that these dc dc converter ics use include PULSE WIDTH MODULATION. DC switcher's voltage input is 12V. Other relevant dc to dc converter ics will be returned if you search "SC4810". Total pins of switching converter are 16. There is a particular type of Switching Regulator or Controllers in switching converter. Input voltage of dc dc voltage regulator must be 6.8V. The test statistics indicate that DC regulator outputs a voltage of 500mV. If you are starting a new project, you should note the dc dc regulator's typical output current is 5mA. Power-up and power-down reliability is ensured voltage regulator dc to dc by setting the maximum duty cycle to 85 %. As DC switcher has a Surface Mount, it's suitable for most applications and prototype designs. Switching controllers work at 1MHz Hz.
SC4810BITSTRT Features
Transistor Driver Outputs
Switching Frequency: 50kHz~1MHz
Current Limit, Frequency Control, Ramp, Soft Start
PULSE WIDTH MODULATION
Max Duty Cycle: 85 %
Frequency: 1MHz
SC4810BITSTRT Applications
There are a lot of Semtech Corporation SC4810BITSTRT DC to DC converter applications.
- Planers
- Nuclear power plants
- PSRR circuits
- Hydro power
- Analog precision reference circuits
- Production lines
- Program control systems
- Scientific testing
- Precision electronic equipment
- Die casting equipment
