SC4810EIMLTRT
| Parameters | |
|---|---|
| Base Part Number | SC4810 |
| Function | Step-Up/Step-Down |
| Number of Outputs | 1 |
| Output Voltage | 500mV |
| Output Type | Transistor Driver |
| Input Voltage-Nom | 12V |
| Analog IC - Other Type | SWITCHING CONTROLLER |
| Output Configuration | Positive, Isolation Capable |
| Output Current | 5mA |
| Voltage - Supply (Vcc/Vdd) | 8.2V~15V |
| Control Features | Current Limit, Frequency Control, Ramp, Soft Start |
| Input Voltage (Min) | 6.8V |
| Topology | Forward Converter |
| Control Mode | CURRENT-MODE |
| Frequency - Switching | 50kHz~1MHz |
| Control Technique | PULSE WIDTH MODULATION |
| Synchronous Rectifier | No |
| Switcher Configuration | PUSH-PULL |
| Max Duty Cycle | 85 % |
| Clock Sync | Yes |
| Length | 4mm |
| Width | 4mm |
| RoHS Status | RoHS Compliant |
| Lead Free | Lead Free |
| Factory Lead Time | 1 Week |
| Mounting Type | Surface Mount |
| Package / Case | 16-VQFN Exposed Pad |
| Surface Mount | YES |
| Number of Pins | 16 |
| Operating Temperature | -40°C~105°C TA |
| Packaging | Tape & Reel (TR) |
| JESD-609 Code | e3 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 16 |
| ECCN Code | EAR99 |
| Terminal Finish | Matte Tin (Sn) |
| Subcategory | Switching Regulator or Controllers |
| Technology | BICMOS |
| Terminal Position | QUAD |
| Peak Reflow Temperature (Cel) | 260 |
| Terminal Pitch | 0.65mm |
| Frequency | 1MHz |
| Time@Peak Reflow Temperature-Max (s) | 40 |
SC4810EIMLTRT Overview
With its 16-VQFN Exposed Pad package, the switching controller fits the needs of most applications. 1 outputs are supported by the dc motor controller. Tape & Reel (TR) is the solid enclosure in which PMIC is packaged. A total of Transistor Driver dc switching's outputs can be handled by it. DC control operates at 8.2V~15V volts and has 8.2V~15V supply voltage. Qualified to work in an dc switcher with -40°C~105°C TA. The switching controller is capable of switching at the 50kHz~1MHz position. The Surface Mount value makes it suitable for general dc dc regulator. Current Limit, Frequency Control, Ramp, Soft Start provides dcdc regulator efficient switching control. The switch converters are connected to an analog IC with a SWITCHING CONTROLLER output. QUAD are the position of the terminal of the switching converters. Different dc switching's functions can be applied to 16 terminations. These dc dc converter ics adapt several control methods, including PULSE WIDTH MODULATION. It is inputted with a DC switcher's voltage of 12V. Other relevant dc to dc converter ics can be found by searching "SC4810". 16 pins are present on switching converter. Particularly, switching converter is a type of Switching Regulator or Controllers. Input voltage of dc dc voltage regulator must be 6.8V. A 500mV voltage of DC regulator was detected in the test statistics. A starting point for a project is to note down the dc dc regulator's usual output current, which is 5mA. Voltage regulator dc to dc is designed to operate at 85 % duty cycle during power-ups and power-downs to ensure reliability. Switching controller operates at a frequency of 1MHz.
SC4810EIMLTRT Features
Transistor Driver Outputs
Switching Frequency: 50kHz~1MHz
Current Limit, Frequency Control, Ramp, Soft Start
PULSE WIDTH MODULATION
Max Duty Cycle: 85 %
Frequency: 1MHz
SC4810EIMLTRT Applications
There are a lot of Semtech Corporation SC4810EIMLTRT DC to DC converter applications.
- Serial communication converter
- Solar power plants
- Current source circuits
- Lathes
- Various precision measuring detectors
- Smoke exhaust equipment
- Smoke prevention equipment
- Electrical power transmission
- Overvoltage protection circuits in TV sets
- Computer-related products
