SC508ULTRT
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 20-UFQFN Exposed Pad |
| Number of Pins | 20 |
| Operating Temperature | -40°C~125°C TJ |
| Packaging | Tape & Reel (TR) |
| Published | 2012 |
| Series | EcoSpeed®, SmartDrive™ |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 20 |
| ECCN Code | EAR99 |
| Additional Feature | ALSO OPERATES IN ADJUSTABLE MODE FROM 0.6 TO 5.5V |
| Subcategory | Switching Regulator or Controllers |
| Terminal Position | QUAD |
| Terminal Pitch | 0.4mm |
| Base Part Number | SC508 |
| Function | Step-Down |
| Output Voltage | 5V |
| Output Type | Transistor Driver |
| Input Voltage-Nom | 12V |
| Analog IC - Other Type | SWITCHING CONTROLLER |
| Output Configuration | Positive |
| Voltage - Supply (Vcc/Vdd) | 4.5V~46V |
| Control Features | Current Limit, Enable, On Time Control, Power Good, Soft Start |
| Input Voltage (Min) | 4.5V |
| Topology | Buck |
| Control Mode | VOLTAGE-MODE |
| Frequency - Switching | Up to 1MHz |
| Input Voltage (Max) | 46V |
| Control Technique | PULSE WIDTH MODULATION |
| Synchronous Rectifier | Yes |
| Switcher Configuration | PUSH-PULL |
| Clock Sync | No |
| Number of Output Phases | 1 |
| Height Seated (Max) | 0.6mm |
| Length | 3mm |
| RoHS Status | RoHS Compliant |
| Lead Free | Lead Free |
SC508ULTRT Overview
Capsuled in the 20-UFQFN Exposed Pad package, the switching controller can be used for a wide range of applications. The pmic is packaged in Tape & Reel (TR) solid enclosure. It is capable of dealing with Transistor Driver dc switching's output (s). dc switching'sThe supply and operating voltage of the dc control are 4.5V~46V. Work well in dc switchers with a -40°C~125°C TJ. Using this switching controller, it is possible to switch at Up to 1MHz. The Surface Mount makes it ideal for general dc dc regulator. Current Limit, Enable, On Time Control, Power Good, Soft Start is used for efficient switching control in the dcdc regulator. Thare switch converters are connected to an analog integrated circuit (IC) of type SWITCHING CONTROLLER. The switching converters's terminal (s) are designed at QUAD . A variety of dc switching's functions can be performed on 20 terminations. It includes PULSE WIDTH MODULATION as one of the control techniques dc dc converter ic adapts. DC switcher's input voltageis set to 12V. A search for "SC508" will reveal other relevant dc to dc converter ics. There are a total of 20 pins on switching converter. Specially, switching converter corresponds to type Switching Regulator or Controllers. dc dc voltage regulators should have a minimum input voltage of 4.5V. According to the test statistics, DC regulator outputs 5V voltage. A maximum voltage of 46V is accepted by the dc to dc regulator as an input voltage. DC switcher's Surface Mount makes it qualified for most application and prototype designs. DC switcher'sTo better satisfy the need, DC to DC voltage regulator has a value of ALSO OPERATES IN ADJUSTABLE MODE FROM 0.6 TO 5.5V. The dc to dc voltage regulator is from the EcoSpeed?, SmartDrive? series. Switches with 1 phases are used in this controller.
SC508ULTRT Features
Transistor Driver Outputs
Switching Frequency: Up to 1MHz
Current Limit, Enable, On Time Control, Power Good, Soft Start
PULSE WIDTH MODULATION
ALSO OPERATES IN ADJUSTABLE MODE FROM 0.6 TO 5.5V
SC508ULTRT Applications
There are a lot of Semtech Corporation SC508ULTRT DC to DC converter applications.
- Linear guide
- Handheld GPS
- Domestic water pumps
- Electrical distribution systems
- Hydro power
- Balance equipment
- Flaw detection equipment
- Terrestrial set-top boxes
- Sensitive electronic devices
- Direct power supply system
