SC600CIMSTRT
| Parameters | |
|---|---|
| Terminal Finish | Matte Tin (Sn) |
| Applications | Backlight |
| Subcategory | Power Management Circuits |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Terminal Pitch | 0.5mm |
| Frequency | 650kHz |
| Time@Peak Reflow Temperature-Max (s) | NOT SPECIFIED |
| Base Part Number | SC600 |
| Pin Count | 10 |
| Number of Outputs | 1 |
| Qualification Status | Not Qualified |
| Input Voltage-Nom | 3.7V |
| Power Supplies | 3/5V |
| Max Supply Voltage | 6.5V |
| Output Current | 60mA |
| Voltage - Output | 5V |
| Input Voltage (Min) | 2.5V |
| Topology | Switched Capacitor (Charge Pump) |
| Output Current per Channel | 60mA |
| Supply Current-Max (Isup) | 2.5mA |
| Switcher Configuration | DOUBLER INVERTER |
| Internal Switch(s) | Yes |
| Voltage - Supply (Min) | 2.5V |
| Length | 3mm |
| Width | 3mm |
| RoHS Status | RoHS Compliant |
| Lead Free | Lead Free |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 10-TFSOP, 10-MSOP (0.118, 3.00mm Width) |
| Number of Pins | 10 |
| Operating Temperature | -40°C~150°C TJ |
| Packaging | Tape & Reel (TR) |
| Published | 2006 |
| Series | mAhXLife™ |
| JESD-609 Code | e3 |
| Pbfree Code | yes |
| Part Status | Obsolete |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 10 |
| ECCN Code | EAR99 |
| Type | DC DC Regulator |
SC600CIMSTRT Overview
It saves board space with the 10-TFSOP, 10-MSOP (0.118, 3.00mm Width) package. In LED drivers, the outputs are all set to 1.It is possible to mount the led driver using Surface Mount.As a DC DC Regulator, it has high efficiency and reliability.It is possible for the led driver ic to operate normally at -40°C~150°C TJ.The benefits of Backlight are considerable.This system operates at 650kHz frequency.The terminations 10 are designed for its operation.With a base of 10, this LED light driver is configured.Undetermined failures will occur if the voltage supply is less than 2.5V.I have mounted it by Surface Mount.The LED driver is based on part number SC600.It is acceptable to have a maximum voltage of 6.5V.There is 5V voltage output from this device.It is equipped with 10 pin count.Furthermore, it can be classified as Power Management Circuits based on its characteristics.It is possible to supply the load with 60mA current.The LED driver belonging to the mAhXLife? series has many applications.When using the device, there is a voltage of 3.7V volts assigned to the circuit.It works well when the input voltage is higher than 2.5V.
SC600CIMSTRT Features
Available in the 10-TFSOP, 10-MSOP (0.118, 3.00mm Width) package
Operating temperature of -40°C~150°C TJ
Frequency of 650kHz
SC600CIMSTRT Applications
There are a lot of Semtech Corporation SC600CIMSTRT LED Driver ICs applications.
- Constant Voltage Power Source for portable equipment
- LED Lightings for Inspection Devices
- High-end retail lighting
- Portable lighting
- Sports Facility Lighting
- Ultraviolet (UV) and Infrared (IR) Irradiation Devices
- Linear fluorescent
- White LED Backlight for portable equipment
- Panel lighting
- OLED power supply for portable equipment
