SC68C752BIBS

3.3V V 1mm mm 5mm mm Interface - UARTs (Universal Asynchronous Receiver Transmitter) 5mm mm CMOS 32 260 32

Manufacturer: NXP Semiconductors / Freescale
Nocochips NO: 568-SC68C752BIBS
Package: -
Datasheet: PDF
Stock: 669
Description: 3.3V V 1mm mm 5mm mm Interface - UARTs (Universal Asynchronous Receiver Transmitter) 5mm mm CMOS 32 260 32 (Kg)

Details

Tags

Parameters
Surface Mount	YES
Number of Pins	32
JESD-609 Code	e4
Pbfree Code	yes
Moisture Sensitivity Level (MSL)	1
Number of Terminations	32
Terminal Finish	Nickel/Palladium/Gold (Ni/Pd/Au)
Max Operating Temperature	85°C
Min Operating Temperature	-40°C
Subcategory	Serial IO/Communication Controllers
Technology	CMOS
Terminal Position	QUAD
Terminal Form	NO LEAD
Peak Reflow Temperature (Cel)	260
Supply Voltage	3.3V
Terminal Pitch	0.5mm
Time@Peak Reflow Temperature-Max (s)	30
Pin Count	32
Qualification Status	Not Qualified
Operating Supply Voltage	5V
Temperature Grade	INDUSTRIAL
Number of Channels	2
Max Supply Voltage	5.5V
Min Supply Voltage	2.25V
Nominal Supply Current	4.5mA
uPs/uCs/Peripheral ICs Type	SERIAL IO/COMMUNICATION CONTROLLER, SERIAL
Clock Frequency	80MHz
Data Rate	5 Mbps
Address Bus Width	4
Boundary Scan	NO
Low Power Mode	YES
External Data Bus Width	8
Number of Serial I/Os	2
Communication Protocol	ASYNC, BIT
Height Seated (Max)	1mm
Length	5mm
Width	5mm
RoHS Status	RoHS Compliant
Lead Free	Lead Free

SC68C752BIBS Overview

Transmission is carried out over 2 channels.The type SERIAL IO/COMMUNICATION CONTROLLER, SERIAL is used for the uPs, uCs, and peripheral ICs on the board.As part of its configuration, it uses 32 terminations.To operate it, 3.3V is provided as the supply voltage.Data communication is handled by 2 serial I/Os.An 32-pin integrated circuit is what this particular device is.There is 80MHz clock frequency measured on this IC.In light of numerous similarities, it is included in the subcategory of Serial IO/Communication Controllers.In order to ensure the normal functioning of the system for long periods of time, the operating temperature should not exceed -40°C.UART is recommended that the operating temperature does not exceed 85°C to ensure long-term, normal performance.The configuration relies on the 32 pins.UART is possible to ensure reliabilUARTy by keeping the supply voltage below 5.5V.Reliability can be ensured when the supply voltage is kept above 2.25V.UART operates at 5V voltage to maintain high efficiency.