SCAN15MB200TSQ/NOPB
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Lifecycle Status | ACTIVE (Last Updated: 5 days ago) |
| Contact Plating | Tin |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 48-WFQFN Exposed Pad |
| Number of Pins | 48 |
| Operating Temperature | -40°C~85°C |
| Packaging | Tape & Reel (TR) |
| JESD-609 Code | e3 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 3 (168 Hours) |
| Number of Terminations | 48 |
| ECCN Code | EAR99 |
| Type | Buffer, Multiplexer |
| Applications | LVDS |
| Subcategory | Other Interface ICs |
| Max Power Dissipation | 5.2W |
| Technology | CMOS |
| Voltage - Supply | 3V~3.6V |
| Terminal Position | QUAD |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 2 |
| Supply Voltage | 3.3V |
| Terminal Pitch | 0.5mm |
| Base Part Number | SCAN15MB200 |
| Operating Supply Voltage | 3.3V |
| Number of Channels | 2 x 2:1, 1:2 |
| Number of Circuits | 2 |
| Power Dissipation | 5.2W |
| Propagation Delay | 2.5 ns |
| Turn On Delay Time | 2.5 ns |
| Current - Supply | 225mA |
| Max Output Voltage | 500mV |
| Logic Function | Buffer, Mux |
| Differential Output | YES |
| Input | CML, LVDS, LVPECL |
| Output Polarity | COMPLEMENTARY |
| Power Consumption | 743W |
| Max Input Current | 15μA |
| Receiver Number of Bits | 3 |
| Number of Drivers | 3 |
| Data Rate (Max) | 1.5Gbps |
| Supply Voltage1-Nom | 3.3V |
| Delay Time | 1.0ns |
| Capacitance - Input | 2pF |
| Signal Conditioning | Output Pre-Emphasis |
| Height | 800μm |
| Length | 7mm |
| Width | 7mm |
| Thickness | 750μm |
| Radiation Hardening | No |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
SCAN15MB200TSQ/NOPB Overview
This power buffer comes in a convenient 48-WFQFN Exposed Pad package for convenient transportation.Package number Tape & Reel (TR) is ready for power buffer.An easy-to-adjust universal mout is included with the Surface Mount.Here's a typical Buffer, Multiplexer.The op amp buffer is powered by 3V~3.6V voltage.It is the cooperation of the 2 x 2:1, 1:2 channels that maintains the quality of the output.As a result, CML, LVDS, LVPECL input can be facilitated.To make sure that the cooling system does not malfunction, you should set the operating temperature to -40°C~85°C.There are a variety of applications for this operational amplifier buffer, including LVDS.Search with "SCAN15MB200" to find more pin-to-pin solutions.The op amp buffer has 48 terminals.During reflow, 260 is the peak temperature.The splitter is supplied with 3.3V voltage, so it is capable of completing a wide range of demanding tasks.It is equipped with 48 pins.As the name suggests, they are a 225mA op amp buffers.A Surface Mount hole is available for mounting it on a PCB or another board.A power buffer like the power buffer plays a crucial role in the industry.It is necessary for 3.3V operating supply voltage to function normally.3-Bit receivers are used in this repeter.Power dissipation is 5.2W at most for this splitter.3 drivers are incorporated into the video signal spliter.
SCAN15MB200TSQ/NOPB Features
2 x 2:1, 1:2 channels.
Mainly used in LVDS.
A standard Other Interface ICs.
3-Bit receiver.
SCAN15MB200TSQ/NOPB Applications
There are a lot of Texas Instruments SCAN15MB200TSQ/NOPB Signal Buffers, Repeaters, Splitters applications.
- Loopback
- Medical
- SATA SSDs or HDDs
- Communications Switchers
- Industrial PCs
- Backplane Interconnect
- Clock Distribution
- Multidrop Buses
- Network Switches/Routers
- Data or Clock Signal Amplification
