SCAN18374TSSC
| Parameters | |
|---|---|
| RoHS Status | ROHS3 Compliant |
| Mounting Type | Surface Mount |
| Package / Case | 56-BSSOP (0.295, 7.50mm Width) |
| Surface Mount | YES |
| Operating Temperature | -40°C~85°C TA |
| Packaging | Tube |
| Series | SCAN |
| JESD-609 Code | e3 |
| Pbfree Code | yes |
| Part Status | Obsolete |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 56 |
| Type | D-Type |
| Terminal Finish | MATTE TIN |
| Technology | CMOS |
| Voltage - Supply | 4.5V~5.5V |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Supply Voltage | 5V |
| Terminal Pitch | 0.635mm |
| Time@Peak Reflow Temperature-Max (s) | NOT SPECIFIED |
| JESD-30 Code | R-PDSO-G56 |
| Function | Standard |
| Qualification Status | Not Qualified |
| Output Type | Tri-State, Non-Inverted |
| Number of Elements | 2 |
| Supply Voltage-Max (Vsup) | 5.5V |
| Supply Voltage-Min (Vsup) | 4.5V |
| Number of Ports | 2 |
| Clock Frequency | 100MHz |
| Current - Quiescent (Iq) | 16μA |
| Output Characteristics | 3-STATE |
| Current - Output High, Low | 24mA 48mA |
| Output Polarity | TRUE |
| Number of Bits per Element | 9 |
| Max Propagation Delay @ V, Max CL | 10.3ns @ 5V, 50pF |
| Trigger Type | Positive Edge |
| Input Capacitance | 4pF |
| Propagation Delay (tpd) | 11.5 ns |
| Length | 18.415mm |
| Width | 7.5mm |
SCAN18374TSSC Overview
56-BSSOP (0.295, 7.50mm Width)is the way it is packaged. It is contained within the Tubepackage. Tri-State, Non-Invertedis the output configured for it. The trigger configured with it uses Positive Edge. There is an electric part mounted in the way of Surface Mount. The supply voltage is set to 4.5V~5.5V. A temperature of -40°C~85°C TAis used in the operation. This logic flip flop is classified as type D-Type. In terms of FPGAs, it belongs to the SCAN series. Its output frequency should not exceed 100MHz. In total, it contains 2 elements. T flip flop consumes 16μA quiescent energy. 56terminations have occurred. A voltage of 5V is used as the power supply for this D latch. Its input capacitance is 4pF farads. 5.5Vis the maximum supply voltage (Vsup). It is imperative that the supply voltage (Vsup) is maintained above 4.5Vin order to ensure normal operation. The flip flop contains 2ports.
SCAN18374TSSC Features
Tube package
SCAN series
SCAN18374TSSC Applications
There are a lot of Rochester Electronics, LLC SCAN18374TSSC Flip Flops applications.
- Power down protection
- ESCC
- Common Clocks
- Buffer registers
- Counters
- Bus hold
- Single Up Count-Control Line
- Automotive
- Load Control
- Circuit Design
