SCC2691AC1N24,129
| Parameters | |
|---|---|
| Mounting Type | Through Hole |
| Package / Case | 24-DIP (0.300, 7.62mm) |
| Surface Mount | NO |
| Packaging | Tube |
| Published | 2006 |
| JESD-609 Code | e3 |
| Feature | Configurable GPIO, Internal Oscillator, Timer/Counter |
| Part Status | Obsolete |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 24 |
| Terminal Finish | Tin (Sn) |
| HTS Code | 8542.31.00.01 |
| Technology | CMOS |
| Voltage - Supply | 5V |
| Terminal Position | DUAL |
| Peak Reflow Temperature (Cel) | NOT SPECIFIED |
| Supply Voltage | 5V |
| Terminal Pitch | 2.54mm |
| Time@Peak Reflow Temperature-Max (s) | NOT SPECIFIED |
| Base Part Number | SCC2691A |
| Pin Count | 24 |
| JESD-30 Code | R-PDIP-T24 |
| Qualification Status | Not Qualified |
| Operating Temperature (Max) | 70°C |
| Temperature Grade | COMMERCIAL |
| Number of Channels | 1, UART |
| Number of I/O | 1 |
| uPs/uCs/Peripheral ICs Type | SERIAL IO/COMMUNICATION CONTROLLER, SERIAL |
| Clock Frequency | 4MHz |
| Supply Current-Max | 2mA |
| Address Bus Width | 3 |
| Boundary Scan | NO |
| Low Power Mode | YES |
| External Data Bus Width | 8 |
| Number of Serial I/Os | 1 |
| Data Transfer Rate-Max | 0.0046875 MBps |
| Communication Protocol | ASYNC, BIT |
| Data Encoding/Decoding Method | NRZ |
| With Auto Flow Control | Yes |
| Height Seated (Max) | 4.7mm |
| Length | 31.7mm |
| Width | 7.62mm |
| RoHS Status | ROHS3 Compliant |
SCC2691AC1N24,129 Overview
UART is available in the cost-effective 24-DIP (0.300, 7.62mm) package.Transmission is done through 1, UART channels.Packaging is based on Tube.The type SERIAL IO/COMMUNICATION CONTROLLER, SERIAL is used for the uPs, uCs, and peripheral ICs on the board.Configured with 24 terminations.This device is powered by a voltage of 5V.At present, this electronic part has a status of Obsolete.In order to communicate data, there are 1 serial I/Os.Mounting it through Through Hole is possible.With a supply voltage of 5V, it operates.There are 24 pins on this electronic device.There is 4MHz clock frequency measured on this IC.There are some characteristics of Configurable GPIO, Internal Oscillator, Timer/Counter that it possesses.Temperatures up to 70°C are possible to operate it.SCC2691A is used as its base part number.There are 1 I/Os designed to transfer data.The acceptable maximum supply current reaches 2mA.
SCC2691AC1N24,129 Features
1 serial I/Os
Clock frequency of 4MHz
1 I/Os
SCC2691AC1N24,129 Applications
There are a lot of NXP USA Inc. SCC2691AC1N24,129 UARTs applications.
- Telecommunication Network Routers
- Domestic Applications
- Ethernet Network to Serial Ports
- Factory Automation
- Serial to Parallel/Parallel to Serial Converter
- Network Management
- Cellular data devices
- Infrared Transceivers
- Portable and battery operated devices
- Universal PCI Bus Add-in Card
