SCC2692AE1A44-T

5V V 4.57mm mm Interface - UARTs (Universal Asynchronous Receiver Transmitter) 15 CMOS 44 245 44

Manufacturer: NXP Semiconductors / Freescale
Nocochips NO: 568-SCC2692AE1A44-T
Package: PLCC
Datasheet: PDF
Stock: 978
Description: 5V V 4.57mm mm Interface - UARTs (Universal Asynchronous Receiver Transmitter) 15 CMOS 44 245 44 (Kg)

Details

Tags

Parameters
Package / Case	PLCC
Surface Mount	YES
JESD-609 Code	e3
Moisture Sensitivity Level (MSL)	3
Number of Terminations	44
Terminal Finish	Tin (Sn)
Max Operating Temperature	85°C
Min Operating Temperature	-40°C
Technology	CMOS
Terminal Position	QUAD
Terminal Form	J BEND
Peak Reflow Temperature (Cel)	245
Supply Voltage	5V
Time@Peak Reflow Temperature-Max (s)	30
Pin Count	44
JESD-30 Code	S-PQCC-J44
Qualification Status	Not Qualified
Operating Supply Voltage	5V
Temperature Grade	INDUSTRIAL
Number of Channels	2
Max Supply Voltage	5.5V
Min Supply Voltage	4.5V
Number of I/O	15
Nominal Supply Current	10mA
uPs/uCs/Peripheral ICs Type	SERIAL IO/COMMUNICATION CONTROLLER, SERIAL
Clock Frequency	3.6864MHz
Data Rate	115.2 kbps
Address Bus Width	4
Boundary Scan	NO
Low Power Mode	YES
External Data Bus Width	8
Number of Serial I/Os	2
Communication Protocol	ASYNC, BIT
Data Encoding/Decoding Method	NRZ
Height Seated (Max)	4.57mm
RoHS Status	RoHS Compliant
Lead Free	Lead Free

SCC2692AE1A44-T Overview

The PLCC package is the most cost-effective.In order to transmit data, there are 2 channels available.There is an uPs/uCs/Peripheral ICs type SERIAL IO/COMMUNICATION CONTROLLER, SERIAL which is used for it.44 terminations are used as parts of its configuration.In order to operate it, a supply voltage of 5V is required.As a means of communicating data, there are 2 serial I/Os available.UART is a type of 44-pin integrated circuUART.A frequency of 3.6864MHz is measured for this IC.UART is important to keep the operating temperature below -40°C to ensure a long working period.Ideally, the operating temperature should not exceed 85°C in order to ensure long-term performance.When the supply voltage is kept below 5.5V, reliability can be assured.When the voltage of the supply exceeds 4.5V, the system will be more reliable.Its high-efficiency operation relies on a voltage of 5V.A total of 15 I/Os are available for data transfer.