SCC2692AE1N28,602
| Parameters | |
|---|---|
| Mounting Type | Through Hole |
| Package / Case | 28-DIP (0.600, 15.24mm) |
| Surface Mount | NO |
| Packaging | Tube |
| Published | 1998 |
| JESD-609 Code | e3 |
| Feature | Configurable GPIO, Internal Oscillator, Timer/Counter |
| Part Status | Obsolete |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 28 |
| Terminal Finish | Tin (Sn) |
| HTS Code | 8542.31.00.01 |
| Subcategory | Serial IO/Communication Controllers |
| Technology | CMOS |
| Voltage - Supply | 5V |
| Terminal Position | DUAL |
| Peak Reflow Temperature (Cel) | NOT SPECIFIED |
| Supply Voltage | 5V |
| Terminal Pitch | 2.54mm |
| Reach Compliance Code | unknown |
| Time@Peak Reflow Temperature-Max (s) | NOT SPECIFIED |
| Base Part Number | SCC2692A |
| Pin Count | 28 |
| JESD-30 Code | R-PDIP-T28 |
| Qualification Status | Not Qualified |
| Operating Temperature (Max) | 85°C |
| Operating Temperature (Min) | -40°C |
| Power Supplies | 5V |
| Temperature Grade | INDUSTRIAL |
| Number of Channels | 2, DUART |
| Number of I/O | 3 |
| uPs/uCs/Peripheral ICs Type | SERIAL IO/COMMUNICATION CONTROLLER, SERIAL |
| Clock Frequency | 3.6864MHz |
| Supply Current-Max | 10mA |
| Address Bus Width | 4 |
| Boundary Scan | NO |
| Low Power Mode | YES |
| External Data Bus Width | 8 |
| Data Rate (Max) | 1Mbps |
| Number of Serial I/Os | 2 |
| Data Transfer Rate-Max | 0.125 MBps |
| Communication Protocol | ASYNC, BIT |
| Data Encoding/Decoding Method | NRZ |
| With Auto Flow Control | Yes |
| Height Seated (Max) | 5.1mm |
| Length | 35.5mm |
| Width | 15.24mm |
| RoHS Status | ROHS3 Compliant |
SCC2692AE1N28,602 Overview
In addition, it is available in the cost-effective package 28-DIP (0.600, 15.24mm).The transmission of information is carried out through 2, DUART channels.Tube is used in terms of packaging.There is an uPs/uCs/Peripheral ICs type SERIAL IO/COMMUNICATION CONTROLLER, SERIAL which is used for it.The configuration uses 28 terminations.UART operates on 5V supply voltage.At present, this electronic part has a status of Obsolete.As a way to communicate data, the board has 2 serial I/Os.A method of mounting it is through Through Hole.There is a voltage supply of 0 volts for the device.An 28-pin integrated circuit is what this particular device is.This IC operates at a clock frequency of 3.6864MHz.Due to a series of similarities, it is included into the subcategory of Serial IO/Communication Controllers.There are some characteristics of Configurable GPIO, Internal Oscillator, Timer/Counter that it possesses.Operating at 85°C is its maximum temperature limit.The use of 5V power supplies is efficient and reliable for electronic designers.SCC2692A is used as its base part number.The device can operate at a temperature of -40°C.A total of 3 I/Os are available for data transfer.Supply currents at 10mA are considered acceptable.
SCC2692AE1N28,602 Features
2 serial I/Os
Clock frequency of 3.6864MHz
Power supplies of 5V
3 I/Os
SCC2692AE1N28,602 Applications
There are a lot of NXP USA Inc. SCC2692AE1N28,602 UARTs applications.
- Factory Automation
- Universal PCI Bus Add-in Card
- Industrial computing
- Multimedia Systems
- GPS Devices
- Remote Access Servers
- Network Management
- Wireless Infrared Data Communications Systems
- Wireless Portable Point-of-Sale Terminals
- DTE for Modem Communication Systems
