SCC2698BE1A84

5V V 4.57mm mm 29.31mm mm Interface - UARTs (Universal Asynchronous Receiver Transmitter) 29.31mm mm CMOS 84 245 84

Manufacturer: NXP Semiconductors / Freescale
Nocochips NO: 568-SCC2698BE1A84
Package: PLCC
Datasheet: -
Stock: 636
Description: 5V V 4.57mm mm 29.31mm mm Interface - UARTs (Universal Asynchronous Receiver Transmitter) 29.31mm mm CMOS 84 245 84 (Kg)

Details

Tags

Parameters
Max Operating Temperature	85°C
Min Operating Temperature	-40°C
Subcategory	Serial IO/Communication Controllers
Technology	CMOS
Terminal Position	QUAD
Terminal Form	J BEND
Peak Reflow Temperature (Cel)	245
Supply Voltage	5V
Terminal Pitch	1.27mm
Time@Peak Reflow Temperature-Max (s)	30
Pin Count	84
Qualification Status	Not Qualified
Operating Supply Voltage	5V
Power Supplies	5V
Temperature Grade	INDUSTRIAL
Number of Channels	8
Max Supply Voltage	5.25V
Min Supply Voltage	4.75V
Nominal Supply Current	30mA
uPs/uCs/Peripheral ICs Type	SERIAL IO/COMMUNICATION CONTROLLER, SERIAL
Clock Frequency	4MHz
Data Rate	115.2 kbps
Address Bus Width	6
Boundary Scan	NO
Low Power Mode	YES
External Data Bus Width	8
Number of Serial I/Os	8
Data Transfer Rate-Max	0.125 MBps
Communication Protocol	ASYNC, BIT
Data Encoding/Decoding Method	NRZ
Height Seated (Max)	4.57mm
Length	29.31mm
Width	29.31mm
RoHS Status	RoHS Compliant
Package / Case	PLCC
Surface Mount	YES
Packaging	Bulk
JESD-609 Code	e3
Pbfree Code	yes
Moisture Sensitivity Level (MSL)	3
Number of Terminations	84
Terminal Finish	Tin (Sn)

SCC2698BE1A84 Overview

The PLCC package is the most cost-effective.Transmission is done through 8 channels.Bulk is adopted as the packaging option.The type SERIAL IO/COMMUNICATION CONTROLLER, SERIAL is used to identify the uPs/uCs/Peripheral ICs on the board.The configuration uses 84 terminations.This device is powered by a voltage of 5V.As a means of transferring data, there are 8 serial I/Os.An IC with 84 pins is what this device is.A frequency of 4MHz is measured for this IC.Due to a series of similarities, it is included into the subcategory of Serial IO/Communication Controllers.To ensure long-term operation, the operating temperature should not exceed -40°C.UART is recommended that the operating temperature does not exceed 85°C to ensure long-term, normal performance.UART is possible to ensure reliabilUARTy when the supply voltage is kept below 5.25V.Keeping the supply voltage above 4.75V ensures reliability.If the power supply is set to 5V, it is reliable and efficient for electronic designers.In order for the device to operate efficiently, 5V is the supply voltage.