Parameters |
Package / Case |
Module |
Operating Temperature |
-10°C~75°C |
Packaging |
Bulk |
Published |
2009 |
Series |
SCD |
Part Status |
Obsolete |
Moisture Sensitivity Level (MSL) |
Not Applicable |
Max Operating Temperature |
75°C |
Min Operating Temperature |
-10°C |
Voltage - Supply |
12V |
Current Rating |
3A |
Frequency |
50Hz/60Hz |
Output |
Ratiometric, Voltage |
Current - Supply (Max) |
25mA |
Output Voltage |
5V |
Polarity |
Unidirectional |
Number of Channels |
1 |
Polarization |
Unidirectional |
Max Supply Current |
25mA |
Response Time |
3μs |
Sensor Type |
Hall Effect, Open Loop |
Linearity |
±0.5% |
For Measuring |
DC |
Current - Sensing |
3A |
Height |
20mm |
Width |
15mm |
RoHS Status |
RoHS Compliant |
Lead Free |
Lead Free |
SCD03PSN Overview
Safety reasons require that the current sensors be placed in Module packages. A protective Bulk is placed over these current sensors in order to prevent damage to the devices. There should be 25mA as the maximum current supplied by these current sensors. Sensors should supply a current below 25mA. To ensure that these current sensors work, the operating temperature cannot be less than -10°C. It is recommended, however, to set the maximum operating temperature of the current sensors to 75°C. A current sensor is designed for a current of 3A. Current sensors should output 5V voltage.
SCD03PSN Features
Moisture Sensitivity Level: Not Applicable
Operating Temperature: -10°C~75°C
1 Channels
Sensor Type: Hall Effect, Open Loop
Supply Voltage: 12V
Frequency: 50Hz/60Hz
Sensing Current: 3A
Module Package
SCD03PSN Applications
There are a lot of CUI Devices SCD03PSN Current Sensors applications.
- OEM Current Sensing
- Static converters for for DC motor drives
- DC and AC power monitoring
- Battery chargers and systems
- Home Automation
- Battery supplied applications
- Power factor correction
- Uninterruptible Power Supplies(UPS)
- Uninterruptable Power Supllies (UPS)
- Inverter and H-bridge current measurements