Parameters |
Linearity |
±0.5% |
For Measuring |
AC |
Current - Sensing |
5A |
Height |
20mm |
Width |
15mm |
RoHS Status |
RoHS Compliant |
Lead Free |
Lead Free |
Package / Case |
Module |
Operating Temperature |
-10°C~75°C |
Packaging |
Bulk |
Published |
2009 |
Series |
SCD |
Part Status |
Obsolete |
Moisture Sensitivity Level (MSL) |
Not Applicable |
Max Operating Temperature |
75°C |
Min Operating Temperature |
-10°C |
Voltage - Supply |
12V |
Current Rating |
5A |
Frequency |
50Hz/60Hz |
Output |
Ratiometric, Voltage |
Current - Supply (Max) |
25mA |
Output Voltage |
5V |
Polarity |
Bidirectional |
Number of Channels |
1 |
Polarization |
Bidirectional |
Max Supply Current |
25mA |
Response Time |
3μs |
Sensor Type |
Hall Effect, Open Loop |
SCD05PSR Overview
The current sensors are put into Module packages for safety protection. In order to protect these current sensors, the Bulk is used to protect them. These current sensors should supply no more than 25mA current. A current sensor should not provide a current greater than 25mA. In order for these current sensors to function, the operating temperature cannot be lower than -10°C. Current sensors should, however, be set to 75°C for their maximum operating temperature. A 5A current sensor has been designed for a 5A current. Voltage output by current sensors should be 5V.
SCD05PSR Features
Moisture Sensitivity Level: Not Applicable
Operating Temperature: -10°C~75°C
1 Channels
Sensor Type: Hall Effect, Open Loop
Supply Voltage: 12V
Frequency: 50Hz/60Hz
Sensing Current: 5A
Module Package
SCD05PSR Applications
There are a lot of CUI Devices SCD05PSR Current Sensors applications.
- Uninterruptible Power Supplies(UPS)
- DC motor drives
- Industrial Monitoring and Control Systems
- Switched Mode Power Supplies(SMPS)
- Inverter and H-bridge current measurements
- Proving Switch
- Switched Mode Power Supplies (SMPS)
- Power factor correction
- DC and AC power monitoring
- Uninterruptable Power Supllies (UPS)