Parameters |
Package / Case |
Module |
Operating Temperature |
-10°C~75°C |
Packaging |
Bulk |
Published |
2009 |
Series |
SCD |
Part Status |
Obsolete |
Moisture Sensitivity Level (MSL) |
Not Applicable |
Max Operating Temperature |
75°C |
Min Operating Temperature |
-10°C |
Voltage - Supply |
12V |
Current Rating |
15A |
Frequency |
50Hz/60Hz |
Output |
Ratiometric, Voltage |
Current - Supply (Max) |
25mA |
Output Voltage |
5V |
Polarity |
Unidirectional |
Number of Channels |
1 |
Polarization |
Unidirectional |
Max Supply Current |
25mA |
Response Time |
3μs |
Sensor Type |
Hall Effect, Open Loop |
Linearity |
±0.5% |
For Measuring |
DC |
Current - Sensing |
15A |
Height |
20mm |
Width |
15mm |
RoHS Status |
RoHS Compliant |
Lead Free |
Lead Free |
SCD15PSN Overview
For safety purposes, the current sensors are housed in Module packages. A Bulk is used to protect the current sensors against damage. The maximum current supplied by these current sensors should be 25mA. Current sensors should not supply a current greater than 25mA. The operating temperature must not be lower than -10°C to ensure these current sensors work. Nevertheless, the current sensors should be set to 75°C as the maximum operating temperature. In this case, the current sensors have been designed for a current of 15A. Voltage output by current sensors should be 5V.
SCD15PSN Features
Moisture Sensitivity Level: Not Applicable
Operating Temperature: -10°C~75°C
1 Channels
Sensor Type: Hall Effect, Open Loop
Supply Voltage: 12V
Frequency: 50Hz/60Hz
Sensing Current: 15A
Module Package
SCD15PSN Applications
There are a lot of CUI Devices SCD15PSN Current Sensors applications.
- Monitor Motor Operation
- Power supplies for welding applications
- DC and AC power monitoring
- Home Automation
- Switched Mode Power Supplies (SMPS)
- Power supply management
- AC variabel speed drives and servo motor drives
- Proving Switch
- Inverter and H-bridge current measurements
- Industrial Monitoring and Control Systems