SCD20PSN
| Parameters | |
|---|---|
| Package / Case | Module |
| Operating Temperature | -10°C~75°C |
| Packaging | Bulk |
| Published | 2009 |
| Series | SCD |
| Part Status | Obsolete |
| Moisture Sensitivity Level (MSL) | Not Applicable |
| Max Operating Temperature | 75°C |
| Min Operating Temperature | -10°C |
| Voltage - Supply | 12V |
| Current Rating | 20A |
| Frequency | 50Hz/60Hz |
| Output | Ratiometric, Voltage |
| Current - Supply (Max) | 25mA |
| Output Voltage | 5V |
| Polarity | Unidirectional |
| Number of Channels | 1 |
| Polarization | Unidirectional |
| Max Supply Current | 25mA |
| Response Time | 3μs |
| Sensor Type | Hall Effect, Open Loop |
| Linearity | ±0.5% |
| For Measuring | DC |
| Current - Sensing | 20A |
| Height | 20mm |
| Width | 15mm |
| RoHS Status | RoHS Compliant |
| Lead Free | Lead Free |
SCD20PSN Overview
As a safety precaution, the current sensors are packaged in Module packages. The devices are protected from damage by the Bulk package. Current sensors should supply no more than 25mA of current. A current sensor should not provide a current greater than 25mA. In order for these current sensors to function, the operating temperature cannot be lower than -10°C. For the current sensors, the maximum operating temperature should be set to 75°C. The current for which the current sensors have been designed is 20A. You should get 5V voltage out of current sensors.
SCD20PSN Features
Moisture Sensitivity Level: Not Applicable
Operating Temperature: -10°C~75°C
1 Channels
Sensor Type: Hall Effect, Open Loop
Supply Voltage: 12V
Frequency: 50Hz/60Hz
Sensing Current: 20A
Module Package
SCD20PSN Applications
There are a lot of CUI Devices SCD20PSN Current Sensors applications.
- Power supplies for welding applications
- Uninterruptable Power Supllies (UPS)
- Frequency, Voltage, and Solar Inverters
- General purpose inverters
- Motor and load control
- Uninterruptible Power Supplies(UPS)
- Switched Mode Power Supplies (SMPS)
- Electrical drives
- Home Automation
- Continuity
