SD3410-002
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Mount | Through Hole |
| Mounting Type | Through Hole |
| Package / Case | TO-46 |
| Number of Pins | 3 |
| Operating Temperature | -55°C~125°C |
| Packaging | Bulk |
| Published | 1997 |
| Part Status | Obsolete |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Max Operating Temperature | 125°C |
| Min Operating Temperature | -55°C |
| Max Power Dissipation | 150mW |
| Number of Elements | 1 |
| Polarity | NPN |
| Power Dissipation | 150mW |
| Viewing Angle | 90° |
| Response Time | 75μs |
| Rise Time | 75μs |
| Fall Time (Typ) | 75 μs |
| Collector Emitter Voltage (VCEO) | 15V |
| Collector Emitter Breakdown Voltage | 15V |
| Wavelength | 880nm |
| Collector Emitter Saturation Voltage | 1.1V |
| Dark Current | 250nA |
| Current - Dark (Typ) | 250nA |
| Diameter | 5.56mm |
| Length | 12.7mm |
| RoHS Status | RoHS Compliant |
SD3410-002 Overview
The photodiodes are packaged in the Bulk in order to prevent damage to them. For safety reasons, the photodiodes are packaged in TO-46 packages. A photodiode has a pin number of 3. In a circuit, the photodiodes may release 150mW heat. It is recommended that photodiodes are operated at a temperature no higher than 125°C. It should be noted that the photodiodes should be operated at -55°C as a minimum operating temperature. Photodiodes should release 150mW heat in a circuit. A photodiode occurs even at 250nA current without light input.
SD3410-002 Features
Moisture Sensitivity Level (MSL): 1 (Unlimited)
Operating Temperature: -55°C~125°C
Packaging: Bulk
Mount: Through Hole
Response Time: 75μs
Viewing Angle: 90°
SD3410-002 Applications
There are a lot of Honeywell Sensing and Productivity Solutions SD3410-002 Photodiodes applications.
- LiDAR
- Light Bariers
- Range finding
- Infrared remote control
- Medical and Industrial
- Pulse Oximetry
- Sterilization Lamp Monitoring
- Low Capacitance
- Photo interrupters
- Light Barriers
