SE5532AD8G
| Parameters | |
|---|---|
| Base Part Number | SE5532 |
| Pin Count | 8 |
| Operating Supply Voltage | 20V |
| Power Supplies | +-15V |
| Number of Channels | 2 |
| Operating Supply Current | 8mA |
| Nominal Supply Current | 8mA |
| Power Dissipation | 780mW |
| Output Current | 38mA |
| Slew Rate | 9V/μs |
| Architecture | VOLTAGE-FEEDBACK |
| Amplifier Type | General Purpose |
| Common Mode Rejection Ratio | 80 dB |
| Current - Input Bias | 200nA |
| Voltage - Supply, Single/Dual (±) | ±3V~20V |
| Halogen Free | Halogen Free |
| Output Current per Channel | 38mA |
| Input Offset Voltage (Vos) | 2mV |
| Bandwidth | 10MHz |
| Neg Supply Voltage-Nom (Vsup) | -15V |
| Unity Gain BW-Nom | 10000 kHz |
| Voltage Gain | 100dB |
| Average Bias Current-Max (IIB) | 0.7μA |
| Power Supply Rejection Ratio (PSRR) | 100dB |
| Low-Offset | NO |
| Frequency Compensation | YES |
| Voltage - Input Offset | 500μV |
| Bias Current-Max (IIB) @25C | 0.4μA |
| Height | 1.5mm |
| Length | 5mm |
| Width | 4mm |
| Radiation Hardening | No |
| REACH SVHC | No SVHC |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
| Factory Lead Time | 1 Week |
| Lifecycle Status | ACTIVE (Last Updated: 2 days ago) |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 8-SOIC (0.154, 3.90mm Width) |
| Number of Pins | 8 |
| Operating Temperature | -55°C~125°C |
| Packaging | Tube |
| Published | 2005 |
| JESD-609 Code | e3 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 8 |
| ECCN Code | EAR99 |
| Terminal Finish | Tin (Sn) |
| Subcategory | Operational Amplifier |
| Packing Method | RAIL |
| Technology | BIPOLAR |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 2 |
| Supply Voltage | 15V |
| Time@Peak Reflow Temperature-Max (s) | 40 |
SE5532AD8G Overview
In order to protect the op amps, a 8-SOIC (0.154, 3.90mm Width) case is used. General Purpose-type instrumentation amplifiers are used in this application. There is a Tube case that is delivered with the instrumentation amplifiers. The number of terminations approaches 8. Buffer amplifier has a total of 8 pins on it. It would be helpful if you could remember that this op amp ic should be powered by an 15V battery. It should be noted that this op amp is a type of Operational Amplifier device. The op amp ic has an array of 8 pins on it. As far as the input offset voltage is concerned, linear amplifier rates at 2mV. This electronic part is best mounted with type Surface Mount. In terms of operating temperature, this instrumentation amplifier is well suited to a temperature range of -55°C~125°C. Operational amplifier can operate supply current at 8mA. There should be no change in the voltage gain. There are a total of 2 channels available on the op amps. The operating supply voltage of the buffer op amp is rated at 20V. As a result of this, the buffer amplifier is packed in RAIL.
SE5532AD8G Features
8 Pins
supply voltage of 15V
100dB voltage gain
SE5532AD8G Applications
There are a lot of ON Semiconductor SE5532AD8G Instrumentational OP Amps applications.
- Wireless base stations
- Vehicle electronics
- Switching amplifier
- Semiconductor detectors
- Measurements of Wheatstone bridge
- Exponential operation circuits
- Logarithmic operation circuits
- Micro signal measurement
- Broadcasting
- Test and measurement instruments
