SE5532NG
| Parameters | |
|---|---|
| Lifecycle Status | OBSOLETE (Last Updated: 1 day ago) |
| Mounting Type | Through Hole |
| Package / Case | 8-DIP (0.300, 7.62mm) |
| Surface Mount | NO |
| Number of Pins | 8 |
| Operating Temperature | -55°C~125°C |
| Packaging | Tube |
| Published | 2006 |
| JESD-609 Code | e3 |
| Pbfree Code | yes |
| Part Status | Obsolete |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 8 |
| ECCN Code | EAR99 |
| Terminal Finish | Tin (Sn) |
| Subcategory | Operational Amplifier |
| Packing Method | RAIL |
| Technology | BIPOLAR |
| Terminal Position | DUAL |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 2 |
| Supply Voltage | 15V |
| Time@Peak Reflow Temperature-Max (s) | 40 |
| Base Part Number | SE5532 |
| Pin Count | 8 |
| Operating Supply Voltage | 20V |
| Number of Elements | 2 |
| Power Supplies | +-15V |
| Operating Supply Current | 8mA |
| Nominal Supply Current | 8mA |
| Power Dissipation | 1.2W |
| Output Current | 38mA |
| Slew Rate | 9V/μs |
| Architecture | VOLTAGE-FEEDBACK |
| Amplifier Type | General Purpose |
| Common Mode Rejection Ratio | 80 dB |
| Current - Input Bias | 200nA |
| Voltage - Supply, Single/Dual (±) | ±3V~20V |
| Output Current per Channel | 38mA |
| Input Offset Voltage (Vos) | 2mV |
| Neg Supply Voltage-Nom (Vsup) | -15V |
| Unity Gain BW-Nom | 10000 kHz |
| Voltage Gain | 100dB |
| Average Bias Current-Max (IIB) | 0.7μA |
| Power Supply Rejection Ratio (PSRR) | 100dB |
| Low-Offset | NO |
| Frequency Compensation | YES |
| Voltage - Input Offset | 500μV |
| Bias Current-Max (IIB) @25C | 0.4μA |
| Nominal Gain Bandwidth Product | 10MHz |
| Height Seated (Max) | 4.45mm |
| Radiation Hardening | No |
| RoHS Status | RoHS Compliant |
| Lead Free | Lead Free |
SE5532NG Overview
In order to protect the op amps, a 8-DIP (0.300, 7.62mm) case is used. Buffer amps of this type are called General Purpose-types. A Tube case is used for delivering the op amp. It is estimated that there will be at least 8 terminations this year. Buffer amplifier has a total of 8 pins on it. This linear amplifier should be powered by an 15V battery. It should be noted that this type of buffer amplifier is exactly what is known as a Operational Amplifier device. 8 pins are located on the operational amplifiers. In terms of the input offset voltage, instrumentation amplifier rates at 2mV. Through Hole is the recommended mounting type of operational amplifiers. In terms of operating temperature, this instrumentation amplifier performs well at a temperature of about -55°C~125°C . It is possible to operate this buffer amplifier from a supply current of 8mA . You should keep the voltage gain at 100dB for the time being. The linear amplifier consists of 2 different elements in total. The operating supply voltage of instrumentation amplifier is rated 20V voltage. For the packing of the instrumentation amplifier, RAIL is adopted.
SE5532NG Features
8 Pins
supply voltage of 15V
100dB voltage gain
SE5532NG Applications
There are a lot of ON Semiconductor SE5532NG Instrumentational OP Amps applications.
- Weighing systems
- Medical instruments
- Navigation
- Voltage regulation circuit
- Car stereo
- Ultrasound transducers
- Medical imaging
- Radiation thermometry transducers
- Precision measurement
- Power control
