SE5534ANG
| Parameters | |
|---|---|
| Lifecycle Status | OBSOLETE (Last Updated: 1 day ago) |
| Mounting Type | Through Hole |
| Package / Case | 8-DIP (0.300, 7.62mm) |
| Surface Mount | NO |
| Number of Pins | 8 |
| Operating Temperature | -55°C~125°C |
| Packaging | Tube |
| Published | 2006 |
| JESD-609 Code | e3 |
| Pbfree Code | yes |
| Part Status | Obsolete |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 8 |
| ECCN Code | EAR99 |
| Terminal Finish | Tin (Sn) |
| Subcategory | Operational Amplifiers |
| Packing Method | RAIL |
| Technology | BIPOLAR |
| Terminal Position | DUAL |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Supply Voltage | 15V |
| Terminal Pitch | 2.54mm |
| Time@Peak Reflow Temperature-Max (s) | 40 |
| Base Part Number | SE5534 |
| Pin Count | 8 |
| Operating Supply Voltage | 20V |
| Number of Channels | 1 |
| Operating Supply Current | 4mA |
| Nominal Supply Current | 8mA |
| Power Dissipation | 1.15W |
| Output Current | 38mA |
| Slew Rate | 13V/μs |
| Architecture | VOLTAGE-FEEDBACK |
| Amplifier Type | General Purpose |
| Common Mode Rejection Ratio | 80 dB |
| Current - Input Bias | 400nA |
| Voltage - Supply, Single/Dual (±) | ±3V~20V |
| Output Current per Channel | 38mA |
| Input Offset Voltage (Vos) | 2mV |
| Bandwidth | 10MHz |
| Neg Supply Voltage-Nom (Vsup) | -15V |
| Unity Gain BW-Nom | 10000 kHz |
| Voltage Gain | 100dB |
| Power Supply Rejection Ratio (PSRR) | 100dB |
| Low-Offset | NO |
| Frequency Compensation | YES AVCL>=3 |
| Supply Voltage Limit-Max | 22V |
| Voltage - Input Offset | 500μV |
| Nominal Gain Bandwidth Product | 10MHz |
| Height Seated (Max) | 4.45mm |
| Radiation Hardening | No |
| REACH SVHC | No SVHC |
| RoHS Status | RoHS Compliant |
| Lead Free | Lead Free |
SE5534ANG Overview
In the package, you will find a 8-DIP (0.300, 7.62mm)-case to contain the op amp ic. An op amp of this type is a General Purpose-type. Instrumentation amplifier is delivered in a Tube case. In recent months, the number of terminations has approached 8. Linear amplifier has a total of 8 pins. I would like to remind you that this buffer op amp should be powered by an 15V battery. This particular linear amplifier is a type of Operational Amplifiers device, to be precise. A total of 8 pins are present on the instrumentation amplifier. With regard to input offset voltage, instrumentation amplifier is rated at 2mV. Through Hole is the recommended mounting type of operational amplifiers. Regarding the operating temperature of this device, instrumentation amplifier performs well at a temperature of -55°C~125°C . You can run this op amp ic on 4mA . You should keep the voltage gain at 100dB for the time being. 1 channels are available on the instrumentation amplifier. The operating supply voltage of instrumentation amplifier is rated 20V voltage. It is used RAIL to pack the op amps.
SE5534ANG Features
8 Pins
supply voltage of 15V
100dB voltage gain
SE5534ANG Applications
There are a lot of ON Semiconductor SE5534ANG Instrumentational OP Amps applications.
- Industrial applications including automation
- Wireless base stations
- Comparator
- Blood pressure sensors
- Information processing
- Power transmission
- Video amplifiers
- Non-polarized electrodes
- Hand-held batteries
- single/dual op amp sum and difference circuits
