SG1524J
| Parameters | |
|---|---|
| Lifecycle Status | IN PRODUCTION (Last Updated: 2 weeks ago) |
| Mount | Through Hole |
| Mounting Type | Through Hole |
| Package / Case | 16-CDIP (0.300, 7.62mm) |
| Number of Pins | 16 |
| Operating Temperature | -55°C~125°C TJ |
| Packaging | Tube |
| JESD-609 Code | e0 |
| Pbfree Code | no |
| Part Status | Discontinued |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 16 |
| ECCN Code | EAR99 |
| Terminal Finish | Tin/Lead (Sn/Pb) |
| Subcategory | Switching Regulator or Controllers |
| Technology | BIPOLAR |
| Terminal Position | DUAL |
| Frequency | 300kHz |
| Base Part Number | SG*524 |
| Function | Step-Down, Step-Up/Step-Down |
| Number of Outputs | 2 |
| Output Voltage | 17V |
| Output Type | Transistor Driver |
| Input Voltage-Nom | 20V |
| Analog IC - Other Type | SWITCHING CONTROLLER |
| Output Configuration | Positive |
| Output Current | 50A |
| Voltage - Supply (Vcc/Vdd) | 8V~40V |
| Quiescent Current | 100μA |
| Control Features | Enable |
| Input Voltage (Min) | 8V |
| Topology | Buck, Flyback, Push-Pull |
| Control Mode | VOLTAGE-MODE |
| Frequency - Switching | 100kHz~300kHz |
| Input Voltage (Max) | 40V |
| Control Technique | PULSE WIDTH MODULATION |
| Rise Time | 400ns |
| Synchronous Rectifier | Yes |
| Fall Time (Typ) | 200 ns |
| Duty Cycle (Max) | 49% |
| Clock Sync | No |
| Output Phases | 1 |
| Height Seated (Max) | 5.08mm |
| RoHS Status | Non-RoHS Compliant |
| Lead Free | Contains Lead |
SG1524J Overview
It comes in a 16-CDIP (0.300, 7.62mm) package, so switching controller can be used for most applications. It is sufficient to generate 2 outputs with this dc motor controller. Tube is the solid enclosure in which PMIC is packaged. A total of Transistor Driver dc switching's outputs can be handled by it. This dc control has a supply voltage and operating voltage of 8V~40V. Worked in an dc switcher with a -55°C~125°C TJ rating. This switching controller can switch at 100kHz~300kHz. The Through Hole value makes it suitable for general dc dc regulator. The dcdc regulator features Enable for efficient switching control. An analog IC SWITCHING CONTROLLER is connected to the switch converters. There are a DUAL terminal on the switching converters. A variety of terminations with 16 of dc switching. Some of the control techniques used by these dc dc converter ics are PULSE WIDTH MODULATION. DC switcher's voltage input of 20V. Other relevant dc to dc converter ics can be found by searching "SG*524". The switching converter has a total of 16 pins. Specially, switching converter corresponds to type Switching Regulator or Controllers. It is recommended to use 8V as the minimum input voltage of dc dc voltage regulator. According to the test statistics, DC regulator outputs 17V voltage. At most, the dc to dc regulator accepts 40V input voltage. In most cases, the dc dc regulator's output current is 50A. This information should be noted when you begin working with the component. This Through Hole makes DC switcher suitable for most prototypes and applications. Switching controller operates at 300kHz Hz. DC switching uses 100μA when it is dormant.
SG1524J Features
Transistor Driver Outputs
Switching Frequency: 100kHz~300kHz
Enable
PULSE WIDTH MODULATION
Frequency: 300kHz
SG1524J Applications
There are a lot of Microchip Technology SG1524J DC to DC converter applications.
- Smoke exhaust equipment
- Scientific testing
- CMM
- Nuclear power plants
- Telecommunications equipment
- Electric water heaters
- Flexible manufacturing cells
- Correction machines
- Network technology
- Driver circuits
