SG1526BJ
| Parameters | |
|---|---|
| Lifecycle Status | IN PRODUCTION (Last Updated: 2 weeks ago) |
| Mount | Through Hole |
| Mounting Type | Through Hole |
| Package / Case | 18-CDIP (0.300, 7.62mm) |
| Number of Pins | 18 |
| Operating Temperature | -55°C~125°C TJ |
| Published | 1997 |
| JESD-609 Code | e0 |
| Pbfree Code | no |
| Part Status | Discontinued |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 18 |
| ECCN Code | EAR99 |
| Terminal Finish | Tin/Lead (Sn/Pb) |
| Subcategory | Switching Regulator or Controllers |
| Technology | BIPOLAR |
| Terminal Position | DUAL |
| Frequency | 500kHz |
| Base Part Number | SG*526 |
| Function | Step-Down, Step-Up/Step-Down |
| Number of Outputs | 2 |
| Output Type | Transistor Driver |
| Input Voltage-Nom | 15V |
| Analog IC - Other Type | SWITCHING CONTROLLER |
| Output Configuration | Positive |
| Output Current | 100A |
| Voltage - Supply (Vcc/Vdd) | 8V~35V |
| Quiescent Current | 18mA |
| Control Features | Dead Time Control, Enable, Frequency Control, Reset, Soft Start |
| Input Voltage (Min) | 8V |
| Topology | Buck, Flyback |
| Control Mode | VOLTAGE-MODE |
| Frequency - Switching | 1Hz~500kHz |
| Input Voltage (Max) | 35V |
| Control Technique | PULSE WIDTH MODULATION |
| Rise Time | 300ns |
| Synchronous Rectifier | Yes |
| Fall Time (Typ) | 100 ns |
| Switcher Configuration | PUSH-PULL |
| Duty Cycle (Max) | 49% |
| Clock Sync | No |
| Output Phases | 1 |
| Height Seated (Max) | 5.08mm |
| RoHS Status | Non-RoHS Compliant |
| Lead Free | Exempt |
SG1526BJ Overview
This switching controller fits most application requirements since it is packaged in a 18-CDIP (0.300, 7.62mm) package. This dc motor controller can be used to generate outputs with 2 numbers. With Transistor Driver dc switching's output (s), it is able to handle it. The supply and operating voltage of the dc control are 8V~35V. Work well in dc switchers with a -55°C~125°C TJ. The switching controller can be switched at 1Hz~500kHz. dc dc regulator is made easier with Through Hole. For efficient switching control, the dcdc regulator features Dead Time Control, Enable, Frequency Control, Reset, Soft Start. The switch converters are connected to a SWITCHING CONTROLLER analog IC. A switching converters's terminal (s) sits at the DUAL position. 18 terminations with various dc switching's functions. The control methods that these dc dc converter ics use include PULSE WIDTH MODULATION. DC switcher's input voltageis 15V volts. Search for "SG*526" to find other relevant dc to dc converter ics. There are a total of 18 pins on switching converter. Specifically, switching converter falls under the Switching Regulator or Controllers category. It is recommended that the dc dc voltage regulator's minimum input voltage be 8V. A maximum voltage of 35V is accepted by the dc to dc regulator as an input voltage. In most cases, the output current of the dc dc regulator will be 100A, so note that when you start the project. DC switcher's Through Hole makes it qualified for most application and prototype designs. DC switcher'sSwitching controller operates at 500kHz Hz. In dormant mode, 18mA is used.
SG1526BJ Features
Transistor Driver Outputs
Switching Frequency: 1Hz~500kHz
Dead Time Control, Enable, Frequency Control, Reset, Soft Start
PULSE WIDTH MODULATION
Frequency: 500kHz
SG1526BJ Applications
There are a lot of Microchip Technology SG1526BJ DC to DC converter applications.
- Cutting machine tools
- Computer-related products
- Magnetohydrodynamic power
- Smart grid
- Analog precision reference circuits
- Plate bending machines
- CNC system
- Wind power
- Gear/thread machining machines
- Smoke exhaust equipment
