SG1526J-883B
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Lifecycle Status | IN PRODUCTION (Last Updated: 1 month ago) |
| Mount | Through Hole |
| Mounting Type | Through Hole |
| Package / Case | 18-DIP (0.300, 7.62mm) |
| Number of Pins | 18 |
| Operating Temperature | -55°C~125°C TA |
| Packaging | Tube |
| Published | 1997 |
| Series | Military, MIL-STD-883B |
| JESD-609 Code | e0 |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 18 |
| ECCN Code | EAR99 |
| Terminal Finish | Tin/Lead (Sn/Pb) |
| Additional Feature | "LG=MAX" |
| Subcategory | Switching Regulator or Controllers |
| Technology | BIPOLAR |
| Terminal Position | DUAL |
| Function | Step-Down, Step-Up/Step-Down |
| Number of Outputs | 2 |
| Output Voltage | 5V |
| Output Type | Transistor Driver |
| Input Voltage-Nom | 15V |
| Analog IC - Other Type | SWITCHING CONTROLLER |
| Output Configuration | Positive |
| Voltage - Supply (Vcc/Vdd) | 8V~35V |
| Control Features | Enable, Reset, Soft Start |
| Input Voltage (Min) | 8V |
| Topology | Buck, Flyback |
| Control Mode | VOLTAGE-MODE |
| Frequency - Switching | 1Hz~350kHz |
| Input Voltage (Max) | 35V |
| Control Technique | PULSE WIDTH MODULATION |
| Rise Time | 300ns |
| Synchronous Rectifier | Yes |
| Fall Time (Typ) | 100 ns |
| Switcher Configuration | PUSH-PULL |
| Max Frequency | 350kHz |
| Output Voltage-Max | 5.05V |
| Output Voltage-Min | 4.95V |
| Duty Cycle (Max) | 49% |
| Clock Sync | No |
| Output Phases | 1 |
| Height Seated (Max) | 5.08mm |
| RoHS Status | RoHS Compliant |
| Lead Free | Contains Lead |
SG1526J-883B Overview
In the 18-DIP (0.300, 7.62mm) package, the switching controller meets most application requirements. The dc motor controller is adquate to generate for 2 outputs. An enclosure of Tube is used to package the PMIC. The program can handle Transistor Driver dc switching's outputs (s). dc control's supply and operating voltages are 8V~35V. Suitable for working in an dc switcher that has a -55°C~125°C TA. In this switching controller, the switch can be set to 1Hz~350kHz. dc dc regulator is made easier with Through Hole. The dcdc regulator features Enable, Reset, Soft Start for efficient switching control. A SWITCHING CONTROLLER analog integrated circuit is connected to the switch converters. There are a DUAL terminal on the switching converters. A variety of dc switching's functions can be performed on 18 terminations. To name a few of the control techniques these dc dc converter ics adapt, it includes PULSE WIDTH MODULATION. DC switcher's voltage input of 15V. 18 pins are present on switching converter. Specially, switching converter corresponds to type Switching Regulator or Controllers. It is recommended to use 8V as the minimum input voltage of dc dc voltage regulator. Test statistics indicate DC regulator outputs 5V voltage. At most, the dc to dc regulator accepts 35V input voltage. DC switcher's Through Hole qualifies it for most applications and prototypes. There is a maximum frequency of 350kHz for this dc regulators. DC to DC voltage regulator has a value of "LG=MAX" to better satisfy the need. Military, MIL-STD-883B series dc to dc voltage regulator belong to this series. 5.05V is the dc controller's maximum voltage output.
SG1526J-883B Features
Transistor Driver Outputs
Switching Frequency: 1Hz~350kHz
Enable, Reset, Soft Start
PULSE WIDTH MODULATION
"LG=MAX"
SG1526J-883B Applications
There are a lot of Microchip Technology SG1526J-883B DC to DC converter applications.
- Imported equipment
- Solar power plants
- Plate bending machines
- Thermal power
- Milling machines
- Remotely powered electric motors
- Smoke prevention equipment
- Scientific research
- Textile machinery
- Sensitive electronic devices
