SG1825CJ
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Lifecycle Status | IN PRODUCTION (Last Updated: 2 weeks ago) |
| Mount | Through Hole |
| Mounting Type | Through Hole |
| Package / Case | DIP |
| Number of Pins | 16 |
| Supplier Device Package | 16-CDIP |
| Operating Temperature | -55°C~125°C TA |
| Published | 1998 |
| Series | Military, MIL-STD-883B |
| JESD-609 Code | e0 |
| Pbfree Code | no |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 16 |
| ECCN Code | EAR99 |
| Terminal Finish | Tin/Lead (Sn/Pb) |
| Additional Feature | CAN ALSO BE CONFIGURED IN VOLTAGE MODE |
| Subcategory | Switching Regulator or Controllers |
| Technology | BIPOLAR |
| Terminal Position | DUAL |
| Base Part Number | SG*825 |
| Function | Step-Down, Step-Up/Step-Down |
| Number of Outputs | 2 |
| Output Voltage | 5.1V |
| Output Type | Transistor Driver |
| Input Voltage-Nom | 15V |
| Analog IC - Other Type | SWITCHING CONTROLLER |
| Output Configuration | Positive |
| Output Current | 200mA |
| Voltage - Supply (Vcc/Vdd) | 10V~30V |
| Quiescent Current | 22mA |
| Control Features | Current Limit, Ramp, Soft Start |
| Topology | Buck, Flyback |
| Control Mode | CURRENT-MODE |
| Frequency - Switching | 4kHz~1.5MHz |
| Input Voltage (Max) | 30V |
| Control Technique | PULSE WIDTH MODULATION |
| Rise Time | 30ns |
| Synchronous Rectifier | Yes |
| Fall Time (Typ) | 30 ns |
| Switcher Configuration | PUSH-PULL |
| Max Frequency | 1.5MHz |
| Duty Cycle (Max) | 85% |
| Clock Sync | No |
| Output Phases | 1 |
| Height Seated (Max) | 5.08mm |
| RoHS Status | Non-RoHS Compliant |
| Lead Free | Exempt |
SG1825CJ Overview
Capsuled in the DIP package, the switching controller can be used for a wide range of applications. 2 outputs are supported by the dc motor controller. It is capable of handling Transistor Driver dc switching's outputs (s). This dc control has a supply voltage and operating voltage of 10V~30V. Work well in dc switchers with a -55°C~125°C TA. Switching can be done at 4kHz~1.5MHz with this switching controller. dc dc regulators can be carried out with Through Hole. To provide efficient switching control, Current Limit, Ramp, Soft Start is included in the dcdc regulator. Connected to a SWITCHING CONTROLLER analog IC, the switch converters are connected to a power supply. There are a DUAL terminal on the switching converters. Various 16 terminations. To name a few of the control techniques these dc dc converter ics adapt, it includes PULSE WIDTH MODULATION. A DC switcher's nominal voltage of 15V is input. A search for "SG*825" will reveal other relevant dc to dc converter ics. Total pins of switching converter are 16. The type is a particular Switching Regulator or Controllers of switching converter. The test statistics indicate that DC regulator outputs a voltage of 5.1V. The dc to dc regulator is limited to 30V input voltage. In most cases, the output current of the dc dc regulator will be 200mA, so note that when you start the project. This Through Hole makes DC switcher suitable for most prototypes and applications. DC regulator's maximum frequency is 1.5MHz. For better satisfaction, the value of DC to DC voltage regulator is CAN ALSO BE CONFIGURED IN VOLTAGE MODE. It belongs to the Military, MIL-STD-883B series of dc to dc voltage regulator. In dormant mode, 22mA is used. Supplier dc dc controller package for this part is 16-CDIP.
SG1825CJ Features
Transistor Driver Outputs
Switching Frequency: 4kHz~1.5MHz
Current Limit, Ramp, Soft Start
PULSE WIDTH MODULATION
CAN ALSO BE CONFIGURED IN VOLTAGE MODE
SG1825CJ Applications
There are a lot of Microchip Technology SG1825CJ DC to DC converter applications.
- Flaw detection equipment
- Computer rooms
- Bending machines
- Shearing machines
- Various precision measuring instruments
- Arc suppression circuits
- Product testing
- Precision electronic equipment
- Automation technology
- Terrestrial set-top boxes
