SG2524DRG4
| Parameters | |
|---|---|
| Lead Free | Lead Free |
| Factory Lead Time | 1 Week |
| Lifecycle Status | ACTIVE (Last Updated: 1 day ago) |
| Mounting Type | Surface Mount |
| Package / Case | 16-SOIC (0.154, 3.90mm Width) |
| Surface Mount | YES |
| Number of Pins | 16 |
| Weight | 141.690917mg |
| Operating Temperature | -25°C~85°C TA |
| Packaging | Tape & Reel (TR) |
| JESD-609 Code | e4 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 16 |
| ECCN Code | EAR99 |
| Terminal Finish | Nickel/Palladium/Gold (Ni/Pd/Au) |
| Subcategory | Switching Regulator or Controllers |
| Technology | BIPOLAR |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Frequency | 722kHz |
| Base Part Number | SG2524 |
| Function | Step-Up, Step-Down, Step-Up/Step-Down |
| Number of Outputs | 2 |
| Output Voltage | 18V |
| Output Type | Transistor Driver |
| Input Voltage-Nom | 20V |
| Analog IC - Other Type | SWITCHING CONTROLLER |
| Output Configuration | Positive, Isolation Capable |
| Output Current | 50mA |
| Voltage - Supply (Vcc/Vdd) | 8V~40V |
| Control Features | Current Limit, Frequency Control |
| Input Voltage (Min) | 8V |
| Topology | Buck, Boost, Flyback, Forward Converter, Full-Bridge, Half-Bridge, Push-Pull |
| Control Mode | VOLTAGE-MODE |
| Frequency - Switching | 450kHz |
| Input Voltage (Max) | 40V |
| Control Technique | PULSE WIDTH MODULATION |
| Rise Time | 200ns |
| Synchronous Rectifier | No |
| Fall Time (Typ) | 100 ns |
| Max Duty Cycle | 45 % |
| Output Phases | 1 |
| Height | 1.75mm |
| Length | 9.9mm |
| Width | 3.91mm |
| Thickness | 1.58mm |
| RoHS Status | ROHS3 Compliant |
SG2524DRG4 Overview
The switching controller fits in the 16-SOIC (0.154, 3.90mm Width) package and is ideal for most applications. There is sufficient capacity to generate switching controller for outputs 2. There is a Tape & Reel (TR) solid enclosure around the pmic. There are Transistor Driver dc switching's output (s) that it can handle. dc controls with 8V~40V voltage are supplied and operated. Suitable for work in a -25°C~85°C TA dc switcher. It can switch at 450kHz. The Surface Mount makes it ideal for general dc dc regulator. In order to control switching efficiently, the dcdc regulator features Current Limit, Frequency Control. A SWITCHING CONTROLLER analog IC is connected to the switch converters. There are a DUAL terminal on the switching converters. There are many different types of terminations for 16. A few of the control techniques these dc dc converter ics adapt include PULSE WIDTH MODULATION. It is inputted with a DC switcher's voltage of 20V. Other relevant dc to dc converter ics can be found by searching "SG2524". There are only 16 pins on switching converter. Switching converter type is specifically Switching Regulator or Controllers. It is recommended that the dc dc voltage regulator's minimum input voltage be 8V. DC regulator outputs 18V voltage according to the test statistics. It should be fully noted that the dc to dc regulator only accepts 40V input voltage at most. You should note that the dc dc regulator's usual output current is 50mA. Power-up and power-down reliability is ensured voltage regulator dc to dc by setting the maximum duty cycle to 45 %. 722kHz is the frequency of the switching controller.
SG2524DRG4 Features
Transistor Driver Outputs
Switching Frequency: 450kHz
Current Limit, Frequency Control
PULSE WIDTH MODULATION
Max Duty Cycle: 45 %
Frequency: 722kHz
SG2524DRG4 Applications
There are a lot of Texas Instruments SG2524DRG4 DC to DC converter applications.
- Magnetohydrodynamic power
- Current source circuits
- Computer rooms
- Driver circuits
- Electric water heaters
- Game consoles
- Computer monitoring equipment of building
- Large fire protection systems
- Refrigerators of central air conditioners
- Serial communication converter
