SG2524N
| Parameters | |
|---|---|
| Lifecycle Status | IN PRODUCTION (Last Updated: 2 weeks ago) |
| Mount | Through Hole |
| Mounting Type | Through Hole |
| Package / Case | 16-DIP (0.300, 7.62mm) |
| Number of Pins | 16 |
| Weight | 1.627801g |
| Operating Temperature | -25°C~85°C TA |
| Packaging | Tube |
| JESD-609 Code | e3 |
| Pbfree Code | yes |
| Part Status | Discontinued |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 16 |
| ECCN Code | EAR99 |
| Terminal Finish | Matte Tin (Sn) |
| Subcategory | Switching Regulator or Controllers |
| Technology | BIPOLAR |
| Terminal Position | DUAL |
| Frequency | 400kHz |
| Base Part Number | SG*524 |
| Function | Step-Down, Step-Up/Step-Down |
| Number of Outputs | 2 |
| Output Voltage | 5V |
| Output Type | Transistor Driver |
| Input Voltage-Nom | 20V |
| Analog IC - Other Type | SWITCHING CONTROLLER |
| Operating Supply Current | 7mA |
| Output Configuration | Positive |
| Output Current | 50mA |
| Voltage - Supply (Vcc/Vdd) | 8V~40V |
| Quiescent Current | 8mA |
| Control Features | Enable |
| Input Voltage (Min) | 8V |
| Topology | Buck, Flyback, Push-Pull |
| Control Mode | VOLTAGE-MODE |
| Frequency - Switching | 100kHz~300kHz |
| Input Voltage (Max) | 40V |
| Control Technique | PULSE WIDTH MODULATION |
| Rise Time | 400ns |
| Synchronous Rectifier | Yes |
| Fall Time (Typ) | 200 ns |
| Max Duty Cycle | 49 % |
| Clock Sync | No |
| Output Phases | 1 |
| Height Seated (Max) | 5.08mm |
| RoHS Status | RoHS Compliant |
| Lead Free | Lead Free |
SG2524N Overview
It comes in a 16-DIP (0.300, 7.62mm) package, so switching controller can be used for most applications. There is sufficient capacity to generate switching controller for outputs 2. Packaging for the pmic consists of Tube solid enclosures. Transistor Driver dc switching's outputs (s) can be handled by it. Voltages 8V~40V are the dc control's supply voltage and operating voltage, respectively. Suitable for work in a -25°C~85°C TA dc switcher. Switching can be done at 100kHz~300kHz with this switching controller. The Through Hole allows it to be used for dc dc regulator in general. For efficient switching control, the dcdc regulator features Enable. SWITCHING CONTROLLER analog IC connects the switch converters. Terminal (s) of the switching converters are designed at the DUAL position. Various 16 terminations. It includes PULSE WIDTH MODULATION as one of the control techniques dc dc converter ic adapts. DC switcher's input voltageis set to 20V. You can find other relevant dc to dc converter ics by searching "SG*524". In total, switching converter has 16 pins. In particular, switching converter is a type of Switching Regulator or Controllers. Input voltage of dc dc voltage regulator should be 8V. Statistically, the DC regulator outputs 5V voltage. Considering the dc to dc regulator can only accept 40V input voltage, it is important to take note of this. In most cases, the output current of the dc dc regulator will be 50mA, so note that when you start the project. Voltage regulator dc to dc is designed to operate at 49 % duty cycle during power-ups and power-downs to ensure reliability. DC switcher's Through Hole makes it qualified for most application and prototype designs. DC switcher's400kHz is the frequency of the switching controller. Dormant dc switchings use 8mA. A current of 7mA is supplied to it.
SG2524N Features
Transistor Driver Outputs
Switching Frequency: 100kHz~300kHz
Enable
PULSE WIDTH MODULATION
Max Duty Cycle: 49 %
Frequency: 400kHz
SG2524N Applications
There are a lot of Microchip Technology SG2524N DC to DC converter applications.
- Digital video recorders
- Scientific testing
- Large fire protection systems
- Hydrogen power
- Serial communication converter
- Smoke exhaust equipment
- Adjustable voltage or current linear circuits
- Medical monitoring systems
- Grinders
- Medical equipment
