SG2525ADW
| Parameters | |
|---|---|
| Rise Time | 100ns |
| Synchronous Rectifier | Yes |
| Fall Time (Typ) | 50 ns |
| Max Duty Cycle | 49 % |
| Output Phases | 1 |
| Length | 9.895mm |
| Width | 3.9mm |
| RoHS Status | RoHS Compliant |
| Lead Free | Lead Free |
| Lifecycle Status | IN PRODUCTION (Last Updated: 2 weeks ago) |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 16-SOIC (0.154, 3.90mm Width) |
| Number of Pins | 16 |
| Weight | 665.986997mg |
| Operating Temperature | -25°C~85°C TA |
| Published | 1997 |
| JESD-609 Code | e3 |
| Pbfree Code | yes |
| Part Status | Discontinued |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 16 |
| ECCN Code | EAR99 |
| Terminal Finish | Matte Tin (Sn) |
| Subcategory | Switching Regulator or Controllers |
| Technology | BIPOLAR |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Frequency | 500kHz |
| Time@Peak Reflow Temperature-Max (s) | 40 |
| Base Part Number | SG*525A |
| Function | Step-Up/Step-Down |
| Number of Outputs | 2 |
| Qualification Status | Not Qualified |
| Output Voltage | 5.1V |
| Output Type | Transistor Driver |
| Input Voltage-Nom | 20V |
| Analog IC - Other Type | SWITCHING CONTROLLER |
| Operating Supply Current | 14mA |
| Output Configuration | Positive |
| Output Current | 500mA |
| Voltage - Supply (Vcc/Vdd) | 8V~35V |
| Quiescent Current | 14mA |
| Control Features | Enable, Soft Start |
| Input Voltage (Min) | 8V |
| Topology | Push-Pull |
| Control Mode | VOLTAGE-MODE |
| Frequency - Switching | 100Hz~350kHz |
| Input Voltage (Max) | 35V |
| Control Technique | PULSE WIDTH MODULATION |
SG2525ADW Overview
The switching controller fits in the 16-SOIC (0.154, 3.90mm Width) package and is ideal for most applications. For 2 outputs, the dc motor controller is appropriate. Transistor Driver dc switching's outputs (s) are supported. 8V~35V is the operating voltage and supply voltage of the dc control. Workable in an dc switcher where -25°C~85°C TA is the -25°C~85°C TArm. The switching controller can be switched at 100Hz~350kHz. dc dc regulators can be carried out with Surface Mount. Switching control is made easier with the dcdc regulator's Enable, Soft Start. An analog IC with the SWITCHING CONTROLLER signal is connected to the switch converters. switching converters terminal (s) are designed to be at DUAL. A variety of dc switching's functions can be performed on 16 terminations. It includes PULSE WIDTH MODULATION as one of the control techniques dc dc converter ic adapts. DC switcher's voltage input is 20V. In addition to "SG*525A", there are other relevant dc to dc converter ics you can find. There are 16 pins on switching converter. There is a particular type of Switching Regulator or Controllers in switching converter. 8V should be the minimum input voltage for the dc dc voltage regulator. The test statistics indicate that DC regulator outputs a voltage of 5.1V. The dc to dc regulator can only accept a maximum input voltage of 35V. If you start a project, note down the dc dc regulator's usual output current of 500mA. The duty cycle of the voltage regulator dc to dc can be set to 49 % on power-up or power-down to ensure reliability. As DC switcher has a Surface Mount, it's suitable for most applications and prototype designs. 500kHz is the frequency of the switching controller. During dormancy, the dc switching uses 14mA. The supply current is 14mA.
SG2525ADW Features
Transistor Driver Outputs
Switching Frequency: 100Hz~350kHz
Enable, Soft Start
PULSE WIDTH MODULATION
Max Duty Cycle: 49 %
Frequency: 500kHz
SG2525ADW Applications
There are a lot of Microchip Technology SG2525ADW DC to DC converter applications.
- Shearing machines
- Current source circuits
- Combined machine tools
- Wind power
- Hydro power
- Electric heating, lighting
- Nuclear power plants
- Telecommunications equipment
- Post equipment
- Die casting equipment
