SG2525AN
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Mount | Surface Mount, Through Hole |
| Mounting Type | Through Hole |
| Package / Case | 16-DIP (0.300, 7.62mm) |
| Number of Pins | 16 |
| Weight | 1.627801g |
| Operating Temperature | -25°C~85°C TA |
| Packaging | Tube |
| Tolerance | 1% |
| JESD-609 Code | e4 |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 16 |
| ECCN Code | EAR99 |
| Terminal Finish | Nickel/Palladium/Gold (Ni/Pd/Au) |
| Subcategory | Switching Regulator or Controllers |
| Technology | BIPOLAR |
| Terminal Position | DUAL |
| Frequency | 500kHz |
| Base Part Number | SG2525 |
| Function | Step-Down, Step-Up/Step-Down |
| Number of Outputs | 2 |
| Output Voltage | 5.15V |
| Output Type | Transistor Driver |
| Input Voltage-Nom | 20V |
| Analog IC - Other Type | SWITCHING CONTROLLER |
| Output Configuration | Positive |
| Output Current | 500mA |
| Voltage - Supply (Vcc/Vdd) | 8V~35V |
| Max Supply Current | 20mA |
| Quiescent Current | 14mA |
| Control Features | Enable, Soft Start |
| Input Voltage (Min) | 8V |
| Topology | Buck, Push-Pull |
| Control Mode | VOLTAGE-MODE |
| Frequency - Switching | 100Hz~400kHz |
| Input Voltage (Max) | 35V |
| Control Technique | PULSE WIDTH MODULATION |
| Reference Voltage | 5.1V |
| Rise Time | 100ns |
| Synchronous Rectifier | Yes |
| Fall Time (Typ) | 50 ns |
| Max Duty Cycle | 49 % |
| Output Phases | 1 |
| Height | 1.6mm |
| Length | 10mm |
| Width | 4mm |
| Radiation Hardening | No |
| REACH SVHC | No SVHC |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
SG2525AN Overview
The switching controller fits in the 16-DIP (0.300, 7.62mm) package and is ideal for most applications. For outputs of 2, this dc motor controller is suitable. Tube solid enclosure protects the pmic. It is capable of dealing with Transistor Driver dc switching's output (s). dc switching'sA 8V~35V voltage is supplied to the dc control and used for operating it. Suitable for a -25°C~85°C TA dc switcher. There is a switch at 100Hz~400kHz that can be used with this controller. As it has a Through Hole value, it can be used for general dc dc regulator. Featured in the dcdc regulator is Enable, Soft Start which allows efficient switching control. Connected to a SWITCHING CONTROLLER analog IC, the switch converters are connected to a power supply. Thare switching converters has a terminal (s) at DUAL . Different dc switching's functions can be applied to 16 terminations. These dc dc converter ics adapt a variety of control techniques, including PULSE WIDTH MODULATION. There is a DC switcher's nominal voltage of 20V. Search for "SG2525" to find other relevant dc to dc converter ics. Total pins of switching converter are 16. Specifically, switching converter falls under the Switching Regulator or Controllers category. Input voltage of dc dc voltage regulator should be 8V. Statistically, DC regulator outputs 5.15V volts. The dc to dc regulator can only accept 35V input voltage. normally, the dc dc regulator's output current is 500mA, which you should keep in mind when starting a project. As a result of this, the maximum duty cycle of the voltage regulator dc to dc must remain 49 % during power-up and power-down. As DC switcher has a Surface Mount, Through Hole, it's suitable for most applications and prototype designs. There is 500kHz frequency setting on the switching controller. A dc switching in a dormant state uses 14mA. The component might suffer damage if the current exceeds 20mA.
SG2525AN Features
Transistor Driver Outputs
Switching Frequency: 100Hz~400kHz
Enable, Soft Start
PULSE WIDTH MODULATION
Max Duty Cycle: 49 %
Frequency: 500kHz
SG2525AN Applications
There are a lot of STMicroelectronics SG2525AN DC to DC converter applications.
- Network technology
- Scientific testing
- Imported equipment
- Refrigerators of central air conditioners
- Printing
- Flexible manufacturing cells
- Smoke exhaust equipment
- Automatic plug-in machines
- Balance equipment
- Servo drive system
