SG2526BDW
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Lifecycle Status | IN PRODUCTION (Last Updated: 2 weeks ago) |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 18-SOIC (0.295, 7.50mm Width) |
| Number of Pins | 18 |
| Operating Temperature | -25°C~85°C TA |
| Published | 1997 |
| JESD-609 Code | e3 |
| Pbfree Code | yes |
| Part Status | Discontinued |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 18 |
| ECCN Code | EAR99 |
| Terminal Finish | Matte Tin (Sn) |
| Subcategory | Switching Regulator or Controllers |
| Technology | BIPOLAR |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Frequency | 500kHz |
| Time@Peak Reflow Temperature-Max (s) | 40 |
| Base Part Number | SG*526 |
| Function | Step-Down, Step-Up/Step-Down |
| Number of Outputs | 2 |
| Output Type | Transistor Driver |
| Input Voltage-Nom | 15V |
| Analog IC - Other Type | SWITCHING CONTROLLER |
| Output Configuration | Positive |
| Voltage - Supply (Vcc/Vdd) | 8V~35V |
| Quiescent Current | 18mA |
| Control Features | Dead Time Control, Enable, Frequency Control, Reset, Soft Start |
| Input Voltage (Min) | 8V |
| Topology | Buck, Flyback |
| Control Mode | VOLTAGE-MODE |
| Frequency - Switching | 1Hz~500kHz |
| Input Voltage (Max) | 35V |
| Control Technique | PULSE WIDTH MODULATION |
| Rise Time | 300ns |
| Synchronous Rectifier | Yes |
| Fall Time (Typ) | 100 ns |
| Switcher Configuration | PUSH-PULL |
| Max Duty Cycle | 49 % |
| Clock Sync | No |
| Output Phases | 1 |
| Width | 7.5mm |
| RoHS Status | RoHS Compliant |
| Lead Free | Lead Free |
SG2526BDW Overview
It comes in the 18-SOIC (0.295, 7.50mm Width) package, which makes switching controller suitable for most applications. It is sufficient to generate 2 outputs with this dc motor controller. With Transistor Driver dc switching's output (s), it is able to handle it. 8V~35V is the operating voltage and supply voltage of the dc control. Workable in an dc switcher where -25°C~85°C TA is the -25°C~85°C TArm. The switching controller is capable of switching at the 1Hz~500kHz position. Surface Mount makes it suitable for general dc dc regulator. DCDC regulator is controlled efficiently by Dead Time Control, Enable, Frequency Control, Reset, Soft Start. Thare switch converters are connected to an analog integrated circuit (IC) of type SWITCHING CONTROLLER. There are a terminal (s) on the switching converters that are designed at DUAL. A variety of terminations with 18 of dc switching. The control methods that these dc dc converter ics use include PULSE WIDTH MODULATION. The nominal DC switcher's voltage input is 15V. You can find other relevant dc to dc converter ics by searching "SG*526". Total pins of switching converter are 18. In particular, switching converter is a type of Switching Regulator or Controllers. The minimum input voltage of the dc dc voltage regulator should be 8V. At most, the dc to dc regulator accepts 35V input voltage. A duty cycle set at 49 % ensures voltage regulator dc to dc reliability during power-on and power-off. DC switcher's Surface Mount qualifies it for most applications and prototypes. 500kHz is the frequency of the switching controller. The dc switching utilizes 18mA when it is in a dormant state.
SG2526BDW Features
Transistor Driver Outputs
Switching Frequency: 1Hz~500kHz
Dead Time Control, Enable, Frequency Control, Reset, Soft Start
PULSE WIDTH MODULATION
Max Duty Cycle: 49 %
Frequency: 500kHz
SG2526BDW Applications
There are a lot of Microchip Technology SG2526BDW DC to DC converter applications.
- Geothermal power
- Access control systems
- Household control circuits
- Series voltage regulation circuits
- Wide-range voltage regulation circuits
- Digital video recorders
- Various precision measuring detectors
- Constant current circuits
- Imported equipment
- Analog precision reference circuits
