SG2526BN
| Parameters | |
|---|---|
| Lifecycle Status | IN PRODUCTION (Last Updated: 2 weeks ago) |
| Mount | Through Hole |
| Mounting Type | Through Hole |
| Package / Case | 18-DIP (0.300, 7.62mm) |
| Number of Pins | 18 |
| Operating Temperature | -25°C~85°C TA |
| Packaging | Tube |
| Published | 1997 |
| JESD-609 Code | e3 |
| Pbfree Code | yes |
| Part Status | Discontinued |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 18 |
| ECCN Code | EAR99 |
| Terminal Finish | Matte Tin (Sn) |
| Subcategory | Switching Regulator or Controllers |
| Technology | BIPOLAR |
| Terminal Position | DUAL |
| Frequency | 500kHz |
| Base Part Number | SG*526 |
| Function | Step-Down, Step-Up/Step-Down |
| Number of Outputs | 2 |
| Output Type | Transistor Driver |
| Input Voltage-Nom | 15V |
| Analog IC - Other Type | SWITCHING CONTROLLER |
| Output Configuration | Positive |
| Voltage - Supply (Vcc/Vdd) | 8V~35V |
| Quiescent Current | 18mA |
| Control Features | Dead Time Control, Enable, Frequency Control, Reset, Soft Start |
| Input Voltage (Min) | 8V |
| Topology | Buck, Flyback |
| Control Mode | VOLTAGE-MODE |
| Frequency - Switching | 1Hz~500kHz |
| Input Voltage (Max) | 35V |
| Control Technique | PULSE WIDTH MODULATION |
| Rise Time | 300ns |
| Synchronous Rectifier | Yes |
| Fall Time (Typ) | 100 ns |
| Switcher Configuration | PUSH-PULL |
| Max Duty Cycle | 49 % |
| Clock Sync | No |
| Output Phases | 1 |
| Height Seated (Max) | 5.08mm |
| RoHS Status | RoHS Compliant |
| Lead Free | Lead Free |
SG2526BN Overview
The switching controller fits in the 18-DIP (0.300, 7.62mm) package and is ideal for most applications. It is sufficient to generate 2 outputs with this dc motor controller. Tube is the solid enclosure in which PMIC is packaged. Transistor Driver dc switching's outputs (s) can be handled by it. dc control's supply and operating voltages are 8V~35V. Suitable for working in an dc switcher that has a -25°C~85°C TA. A switching controller such as this can switch at a value of 1Hz~500kHz . As it has a Through Hole value, it can be used for general dc dc regulator. To provide efficient switching control, Dead Time Control, Enable, Frequency Control, Reset, Soft Start is included in the dcdc regulator. A SWITCHING CONTROLLER analog IC is connected to the switch converters. There are a terminal (s) on the switching converters that are designed at DUAL. A variety of dc switching's functions can be performed on 18 terminations. These dc dc converter ics adapt several control methods, including PULSE WIDTH MODULATION. DC switcher's input voltageis set to 15V. You can find other relevant dc to dc converter ics by searching "SG*526". 18 pins are on switching converter. In particular, switching converter belongs to the Switching Regulator or Controllers family. This dc dc voltage regulator should be powered by a voltage of 8V. At most, the dc to dc regulator accepts 35V input voltage. voltage regulator dc to dcs with a 49 % duty cycle are designed to be reliable when powered on and powered off. Having a Through Hole makes DC switcher ideal for most prototype and application designs. The switching controller works at a frequency of 500kHz. DC switchings that are dormant use 18mA.
SG2526BN Features
Transistor Driver Outputs
Switching Frequency: 1Hz~500kHz
Dead Time Control, Enable, Frequency Control, Reset, Soft Start
PULSE WIDTH MODULATION
Max Duty Cycle: 49 %
Frequency: 500kHz
SG2526BN Applications
There are a lot of Microchip Technology SG2526BN DC to DC converter applications.
- Game consoles
- Refrigerators of central air conditioners
- Low output voltage switching power supply circuits
- Experimental setup
- Communication system
- Emergency lighting monitoring equipment
- Electrical power transmission
- Balance equipment
- Imported equipment
- Terrestrial set-top boxes
