SG2526DW
| Parameters | |
|---|---|
| Lifecycle Status | IN PRODUCTION (Last Updated: 2 weeks ago) |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 18-SOIC (0.295, 7.50mm Width) |
| Number of Pins | 18 |
| Operating Temperature | -25°C~85°C TA |
| Published | 1997 |
| JESD-609 Code | e3 |
| Pbfree Code | yes |
| Part Status | Discontinued |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 18 |
| ECCN Code | EAR99 |
| Terminal Finish | Matte Tin (Sn) |
| Subcategory | Switching Regulator or Controllers |
| Technology | BIPOLAR |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Frequency | 500kHz |
| Time@Peak Reflow Temperature-Max (s) | 40 |
| Base Part Number | SG*526 |
| Function | Step-Down, Step-Up/Step-Down |
| Number of Outputs | 2 |
| Output Voltage | 5V |
| Output Type | Transistor Driver |
| Input Voltage-Nom | 15V |
| Analog IC - Other Type | SWITCHING CONTROLLER |
| Output Configuration | Positive |
| Voltage - Supply (Vcc/Vdd) | 8V~35V |
| Quiescent Current | 18mA |
| Control Features | Dead Time Control, Enable, Frequency Control, Reset, Soft Start |
| Input Voltage (Min) | 8V |
| Topology | Buck, Flyback |
| Control Mode | VOLTAGE-MODE |
| Frequency - Switching | 1Hz~350kHz |
| Input Voltage (Max) | 35V |
| Control Technique | PULSE WIDTH MODULATION |
| Rise Time | 300ns |
| Synchronous Rectifier | Yes |
| Fall Time (Typ) | 100 ns |
| Switcher Configuration | PUSH-PULL |
| Output Voltage-Max | 5.05V |
| Output Voltage-Min | 4.95V |
| Duty Cycle (Max) | 49% |
| Clock Sync | No |
| Output Phases | 1 |
| Width | 7.5mm |
| RoHS Status | RoHS Compliant |
| Lead Free | Lead Free |
SG2526DW Overview
Capsuled in the 18-SOIC (0.295, 7.50mm Width) package, the switching controller can be used for a wide range of applications. 2 outputs can be generated with the dc motor controller. The system can process Transistor Driver dc switching's outputs (s). dc control's supply and operating voltages are 8V~35V. Worked in an dc switcher with a -25°C~85°C TA rating. Using this switching controller, it is possible to switch at 1Hz~350kHz. dc dc regulator can be generalized using Surface Mount. To ensure efficient switching, this dcdc regulator features a Dead Time Control, Enable, Frequency Control, Reset, Soft Start. Connected to a SWITCHING CONTROLLER analog IC, the switch converters are connected to a power supply. The switching converters's terminals (s) are designed at DUAL. The 18 terminations can be used for a wide range of dc switching. These dc dc converter ics adapt a variety of control techniques, including PULSE WIDTH MODULATION. DC switcher's input voltageis set to 15V. Other relevant dc to dc converter ics will be returned if you search "SG*526". There are only 18 pins on switching converter. Particularly, switching converter is a type of Switching Regulator or Controllers. It is recommended to use 8V as the minimum input voltage of dc dc voltage regulator. The test statistics indicate that DC regulator outputs a voltage of 5V. It should be noted that the dc to dc regulator only accepts 35V voltage as input voltage. Having a Surface Mount makes DC switcher suitable for most application and prototype designs. Switching controller operates at 500kHz Hz. The dc switching utilizes 18mA when it is in a dormant state. 5.05V represents the highest voltage output of the dc controller.
SG2526DW Features
Transistor Driver Outputs
Switching Frequency: 1Hz~350kHz
Dead Time Control, Enable, Frequency Control, Reset, Soft Start
PULSE WIDTH MODULATION
Frequency: 500kHz
SG2526DW Applications
There are a lot of Microchip Technology SG2526DW DC to DC converter applications.
- Photovoltaic power
- Computer monitoring equipment of building
- Communication system
- Shearing machines
- Precision electronic equipment
- Current source circuits
- Bending machines
- Flexible manufacturing cells
- Electrical power transmission
- Domestic water pumps
